Pot Lilies
We carry 243 plants that match your search request. We've included all matches below. Click on any plant to learn additional details.
Location
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsSoil Preparation and Planting
Best grown in fertile, humusy, organically rich, medium to wet soils in part shade or filtered sun. In general, green types can take higher light levels; dark-leaved ones need shade. Once nighttime temperatures are consistently 50-60° F, plant each bulb 6-8" deep and 2-4 feet apart. Water generously.
Fertilization
Fertilize Colocasia every three weeks during fall and winter. Use a liquid plant food with a balanced N-P-K ratio such as 10-10-10 or 20-20-20, diluted to half the strength recommended on the label. Water the fertilizer deeply into the soil immediately after application.
Water
Elephant ears are high water plants. Water as needed to keep the soil consistently moist, and don't allow the soil to become dry. Colocasia likes wet soil and is even appropriate for planting next to a pond, or in water up to 6 inches deep. Check the soil often if the bulbs are planted in sunlight.
Fall Care and Storage
Dig Colocasia bulbs after the first frost in autumn if you live in a climate with cold winters. Cut the foliage down to 2 to 4 inches before cutting. Allow the bulbs to dry for a day, and then place the bulbs in a box of wood shavings or peat moss. Store the box where the temperatures don't drop below 45°F.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsSoil and Preparation:
Gladioli are one of the easiest flowers to grow. They do well in a wide range of soil types – provided drainage is good, but they grow best in soil with a pH of 6.5 to 7. Most garden soil that will produce a good crop of vegetables or weeds will also grow good glads with little or no added fertilizer. Glads prefer full sunlight, but will do reasonably well with a little high shade in early morning or late afternoon. Good circulation is desirable, so stay away from buildings or other obstructions, which might impede airflow. Plow, rototill, or spade your soil as you would for any other garden plants. It is best to move your glad plantings from one area to another each year to help prevent carryover of diseases in the soil. If soil tests or other reliable indicators point to a lack of nutrients, a balanced commercial fertilizer such as 5-10-10 may be incorporated into the soil immediately prior to planting, at a rate of 2- 3 pounds per 100 square feet. Avoid over-fertilizing. Composted animal manure or leaves should only be worked into the soil in the fall.
Planting:
Your first planting should be when you would normally plant sweet corn in your area. Corms (commonly called bulbs) planted in cold soils are apt to rot before they begin to grow. Subsequent plantings at two-week intervals will ensure bloom over a long period of time. We recommend planting corms three to five inches deep and from four to six inches apart, in rows spaced 12-36 inches apart. Insecticide spread in the trench before covering will discourage underground insects. Before glads bloom, hilling soil six inches up around the stalk helps prevent the glads from tipping over during storms. If drainage is a problem in your soil, rows should be raised to facilitate the process. Soggy, compacted soil will hamper root growth and contribute to root rot.
Watering:
Remember that glads need plenty of water, but will not tolerate wet feet. Lack of water inhibits spike growth, flower development and bulb growth. At least an inch of water per week is a good guideline.
Fertilization During Growing:
Before starting any fertilization program, always test the soil for nutrient content. The application of fertilizer should coincide with crop needs. We recommend starting fertilization when the third or fourth leaf is visible. Amounts will vary according to the soil test, but for poor, light soil you may use a fertilizer of 5-10-10 again, or just nitrogen if the nutrient content of your soil is balanced. You would apply this as a side dressing.
Weed and Insect Control:
Weed by shallow cultivation and hand weeding. If available, a light mulch of straw, grass clippings, etc. between rows will discourage weeds and help conserve moisture. Insect control is important in growing glads. Pests include thrip, which is by far the most damaging. Thrip are tiny insects, tan to black in color and less than 1/8” in length. They can be controlled by several good combination sprays and dusts, including organic products, and are available at your local garden centers. If you chose organic products, more frequent applications will be needed.
Digging Corms (Bulbs):
If you live where the ground does not freeze in the winter, you may choose not to dig your corms; however, disease and crowding may reduce the amount and quality of your bloom. You should remove plant tops 6-8 weeks after bloom and remove them from the garden to prevent the spread of disease. It is suggested that you dig and divide your corms every couple of years, being sure to discard any damaged or diseased corms. If you live where the ground freezes, you will need to dig your corms each year, or if you choose not to dig, purchase new corms in the spring. Corms should be lifted in the fall before the onset of freezing weather. About 6-8 weeks after blooming, the corms may be harvested by loosening the soil with a spade or digging fork so that the plants can be pulled up by hand. The plant should be separated from the corm as close to the corm as possible, either by hand breaking or by cutting with pruning shears. You should remove the old plant tops from the field to prevent carryover of disease. The corms should be cleaned or rinsed off with running water, and then spread out to dry in shallow layers in trays or porous bags in an airy location that will not freeze for a period of 2 to 3 weeks. During this time a cork layer forms between the new corm and the old mother corm and roots. Break off and discard this old corm as soon as possible. Undue delay in cleaning results in greater difficulty in removal of the old corm.
Corm Storage:
After cleaning, corms should be lightly dusted with a combination fungicide/insecticide dust, placed in shallow trays, mesh bags or open paper bags to be stored for the winter. Do not use any covering material. A well-ventilated root cellar is ideal, but any room with good air circulation in the average home basement will suffice if temperatures can be kept between 35-50 degrees. The lower temperature is best, as long as they do not freeze.
More DetailsSoil and Preparation:
Gladioli are one of the easiest flowers to grow. They do well in a wide range of soil types – provided drainage is good, but they grow best in soil with a pH of 6.5 to 7. Most garden soil that will produce a good crop of vegetables or weeds will also grow good glads with little or no added fertilizer. Glads prefer full sunlight, but will do reasonably well with a little high shade in early morning or late afternoon. Good circulation is desirable, so stay away from buildings or other obstructions, which might impede airflow. Plow, rototill, or spade your soil as you would for any other garden plants. It is best to move your glad plantings from one area to another each year to help prevent carryover of diseases in the soil. If soil tests or other reliable indicators point to a lack of nutrients, a balanced commercial fertilizer such as 5-10-10 may be incorporated into the soil immediately prior to planting, at a rate of 2- 3 pounds per 100 square feet. Avoid over-fertilizing. Composted animal manure or leaves should only be worked into the soil in the fall.
Planting:
Your first planting should be when you would normally plant sweet corn in your area. Corms (commonly called bulbs) planted in cold soils are apt to rot before they begin to grow. Subsequent plantings at two-week intervals will ensure bloom over a long period of time. We recommend planting corms three to five inches deep and from four to six inches apart, in rows spaced 12-36 inches apart. Insecticide spread in the trench before covering will discourage underground insects. Before glads bloom, hilling soil six inches up around the stalk helps prevent the glads from tipping over during storms. If drainage is a problem in your soil, rows should be raised to facilitate the process. Soggy, compacted soil will hamper root growth and contribute to root rot.
Watering:
Remember that glads need plenty of water, but will not tolerate wet feet. Lack of water inhibits spike growth, flower development and bulb growth. At least an inch of water per week is a good guideline.
Fertilization During Growing:
Before starting any fertilization program, always test the soil for nutrient content. The application of fertilizer should coincide with crop needs. We recommend starting fertilization when the third or fourth leaf is visible. Amounts will vary according to the soil test, but for poor, light soil you may use a fertilizer of 5-10-10 again, or just nitrogen if the nutrient content of your soil is balanced. You would apply this as a side dressing.
Weed and Insect Control:
Weed by shallow cultivation and hand weeding. If available, a light mulch of straw, grass clippings, etc. between rows will discourage weeds and help conserve moisture. Insect control is important in growing glads. Pests include thrip, which is by far the most damaging. Thrip are tiny insects, tan to black in color and less than 1/8” in length. They can be controlled by several good combination sprays and dusts, including organic products, and are available at your local garden centers. If you chose organic products, more frequent applications will be needed.
Digging Corms (Bulbs):
If you live where the ground does not freeze in the winter, you may choose not to dig your corms; however, disease and crowding may reduce the amount and quality of your bloom. You should remove plant tops 6-8 weeks after bloom and remove them from the garden to prevent the spread of disease. It is suggested that you dig and divide your corms every couple of years, being sure to discard any damaged or diseased corms. If you live where the ground freezes, you will need to dig your corms each year, or if you choose not to dig, purchase new corms in the spring. Corms should be lifted in the fall before the onset of freezing weather. About 6-8 weeks after blooming, the corms may be harvested by loosening the soil with a spade or digging fork so that the plants can be pulled up by hand. The plant should be separated from the corm as close to the corm as possible, either by hand breaking or by cutting with pruning shears. You should remove the old plant tops from the field to prevent carryover of disease. The corms should be cleaned or rinsed off with running water, and then spread out to dry in shallow layers in trays or porous bags in an airy location that will not freeze for a period of 2 to 3 weeks. During this time a cork layer forms between the new corm and the old mother corm and roots. Break off and discard this old corm as soon as possible. Undue delay in cleaning results in greater difficulty in removal of the old corm.
Corm Storage:
After cleaning, corms should be lightly dusted with a combination fungicide/insecticide dust, placed in shallow trays, mesh bags or open paper bags to be stored for the winter. Do not use any covering material. A well-ventilated root cellar is ideal, but any room with good air circulation in the average home basement will suffice if temperatures can be kept between 35-50 degrees. The lower temperature is best, as long as they do not freeze.
More DetailsSoil and Preparation:
Gladioli are one of the easiest flowers to grow. They do well in a wide range of soil types – provided drainage is good, but they grow best in soil with a pH of 6.5 to 7. Most garden soil that will produce a good crop of vegetables or weeds will also grow good glads with little or no added fertilizer. Glads prefer full sunlight, but will do reasonably well with a little high shade in early morning or late afternoon. Good circulation is desirable, so stay away from buildings or other obstructions, which might impede airflow. Plow, rototill, or spade your soil as you would for any other garden plants. It is best to move your glad plantings from one area to another each year to help prevent carryover of diseases in the soil. If soil tests or other reliable indicators point to a lack of nutrients, a balanced commercial fertilizer such as 5-10-10 may be incorporated into the soil immediately prior to planting, at a rate of 2- 3 pounds per 100 square feet. Avoid over-fertilizing. Composted animal manure or leaves should only be worked into the soil in the fall.
Planting:
Your first planting should be when you would normally plant sweet corn in your area. Corms (commonly called bulbs) planted in cold soils are apt to rot before they begin to grow. Subsequent plantings at two-week intervals will ensure bloom over a long period of time. We recommend planting corms three to five inches deep and from four to six inches apart, in rows spaced 12-36 inches apart. Insecticide spread in the trench before covering will discourage underground insects. Before glads bloom, hilling soil six inches up around the stalk helps prevent the glads from tipping over during storms. If drainage is a problem in your soil, rows should be raised to facilitate the process. Soggy, compacted soil will hamper root growth and contribute to root rot.
Watering:
Remember that glads need plenty of water, but will not tolerate wet feet. Lack of water inhibits spike growth, flower development and bulb growth. At least an inch of water per week is a good guideline.
Fertilization During Growing:
Before starting any fertilization program, always test the soil for nutrient content. The application of fertilizer should coincide with crop needs. We recommend starting fertilization when the third or fourth leaf is visible. Amounts will vary according to the soil test, but for poor, light soil you may use a fertilizer of 5-10-10 again, or just nitrogen if the nutrient content of your soil is balanced. You would apply this as a side dressing.
Weed and Insect Control:
Weed by shallow cultivation and hand weeding. If available, a light mulch of straw, grass clippings, etc. between rows will discourage weeds and help conserve moisture. Insect control is important in growing glads. Pests include thrip, which is by far the most damaging. Thrip are tiny insects, tan to black in color and less than 1/8” in length. They can be controlled by several good combination sprays and dusts, including organic products, and are available at your local garden centers. If you chose organic products, more frequent applications will be needed.
Digging Corms (Bulbs):
If you live where the ground does not freeze in the winter, you may choose not to dig your corms; however, disease and crowding may reduce the amount and quality of your bloom. You should remove plant tops 6-8 weeks after bloom and remove them from the garden to prevent the spread of disease. It is suggested that you dig and divide your corms every couple of years, being sure to discard any damaged or diseased corms. If you live where the ground freezes, you will need to dig your corms each year, or if you choose not to dig, purchase new corms in the spring. Corms should be lifted in the fall before the onset of freezing weather. About 6-8 weeks after blooming, the corms may be harvested by loosening the soil with a spade or digging fork so that the plants can be pulled up by hand. The plant should be separated from the corm as close to the corm as possible, either by hand breaking or by cutting with pruning shears. You should remove the old plant tops from the field to prevent carryover of disease. The corms should be cleaned or rinsed off with running water, and then spread out to dry in shallow layers in trays or porous bags in an airy location that will not freeze for a period of 2 to 3 weeks. During this time a cork layer forms between the new corm and the old mother corm and roots. Break off and discard this old corm as soon as possible. Undue delay in cleaning results in greater difficulty in removal of the old corm.
Corm Storage:
After cleaning, corms should be lightly dusted with a combination fungicide/insecticide dust, placed in shallow trays, mesh bags or open paper bags to be stored for the winter. Do not use any covering material. A well-ventilated root cellar is ideal, but any room with good air circulation in the average home basement will suffice if temperatures can be kept between 35-50 degrees. The lower temperature is best, as long as they do not freeze.
More DetailsSoil and Preparation:
Gladioli are one of the easiest flowers to grow. They do well in a wide range of soil types – provided drainage is good, but they grow best in soil with a pH of 6.5 to 7. Most garden soil that will produce a good crop of vegetables or weeds will also grow good glads with little or no added fertilizer. Glads prefer full sunlight, but will do reasonably well with a little high shade in early morning or late afternoon. Good circulation is desirable, so stay away from buildings or other obstructions, which might impede airflow. Plow, rototill, or spade your soil as you would for any other garden plants. It is best to move your glad plantings from one area to another each year to help prevent carryover of diseases in the soil. If soil tests or other reliable indicators point to a lack of nutrients, a balanced commercial fertilizer such as 5-10-10 may be incorporated into the soil immediately prior to planting, at a rate of 2- 3 pounds per 100 square feet. Avoid over-fertilizing. Composted animal manure or leaves should only be worked into the soil in the fall.
Planting:
Your first planting should be when you would normally plant sweet corn in your area. Corms (commonly called bulbs) planted in cold soils are apt to rot before they begin to grow. Subsequent plantings at two-week intervals will ensure bloom over a long period of time. We recommend planting corms three to five inches deep and from four to six inches apart, in rows spaced 12-36 inches apart. Insecticide spread in the trench before covering will discourage underground insects. Before glads bloom, hilling soil six inches up around the stalk helps prevent the glads from tipping over during storms. If drainage is a problem in your soil, rows should be raised to facilitate the process. Soggy, compacted soil will hamper root growth and contribute to root rot.
Watering:
Remember that glads need plenty of water, but will not tolerate wet feet. Lack of water inhibits spike growth, flower development and bulb growth. At least an inch of water per week is a good guideline.
Fertilization During Growing:
Before starting any fertilization program, always test the soil for nutrient content. The application of fertilizer should coincide with crop needs. We recommend starting fertilization when the third or fourth leaf is visible. Amounts will vary according to the soil test, but for poor, light soil you may use a fertilizer of 5-10-10 again, or just nitrogen if the nutrient content of your soil is balanced. You would apply this as a side dressing.
Weed and Insect Control:
Weed by shallow cultivation and hand weeding. If available, a light mulch of straw, grass clippings, etc. between rows will discourage weeds and help conserve moisture. Insect control is important in growing glads. Pests include thrip, which is by far the most damaging. Thrip are tiny insects, tan to black in color and less than 1/8” in length. They can be controlled by several good combination sprays and dusts, including organic products, and are available at your local garden centers. If you chose organic products, more frequent applications will be needed.
Digging Corms (Bulbs):
If you live where the ground does not freeze in the winter, you may choose not to dig your corms; however, disease and crowding may reduce the amount and quality of your bloom. You should remove plant tops 6-8 weeks after bloom and remove them from the garden to prevent the spread of disease. It is suggested that you dig and divide your corms every couple of years, being sure to discard any damaged or diseased corms. If you live where the ground freezes, you will need to dig your corms each year, or if you choose not to dig, purchase new corms in the spring. Corms should be lifted in the fall before the onset of freezing weather. About 6-8 weeks after blooming, the corms may be harvested by loosening the soil with a spade or digging fork so that the plants can be pulled up by hand. The plant should be separated from the corm as close to the corm as possible, either by hand breaking or by cutting with pruning shears. You should remove the old plant tops from the field to prevent carryover of disease. The corms should be cleaned or rinsed off with running water, and then spread out to dry in shallow layers in trays or porous bags in an airy location that will not freeze for a period of 2 to 3 weeks. During this time a cork layer forms between the new corm and the old mother corm and roots. Break off and discard this old corm as soon as possible. Undue delay in cleaning results in greater difficulty in removal of the old corm.
Corm Storage:
After cleaning, corms should be lightly dusted with a combination fungicide/insecticide dust, placed in shallow trays, mesh bags or open paper bags to be stored for the winter. Do not use any covering material. A well-ventilated root cellar is ideal, but any room with good air circulation in the average home basement will suffice if temperatures can be kept between 35-50 degrees. The lower temperature is best, as long as they do not freeze.
More DetailsSoil and Preparation:
Gladioli are one of the easiest flowers to grow. They do well in a wide range of soil types – provided drainage is good, but they grow best in soil with a pH of 6.5 to 7. Most garden soil that will produce a good crop of vegetables or weeds will also grow good glads with little or no added fertilizer. Glads prefer full sunlight, but will do reasonably well with a little high shade in early morning or late afternoon. Good circulation is desirable, so stay away from buildings or other obstructions, which might impede airflow. Plow, rototill, or spade your soil as you would for any other garden plants. It is best to move your glad plantings from one area to another each year to help prevent carryover of diseases in the soil. If soil tests or other reliable indicators point to a lack of nutrients, a balanced commercial fertilizer such as 5-10-10 may be incorporated into the soil immediately prior to planting, at a rate of 2- 3 pounds per 100 square feet. Avoid over-fertilizing. Composted animal manure or leaves should only be worked into the soil in the fall.
Planting:
Your first planting should be when you would normally plant sweet corn in your area. Corms (commonly called bulbs) planted in cold soils are apt to rot before they begin to grow. Subsequent plantings at two-week intervals will ensure bloom over a long period of time. We recommend planting corms three to five inches deep and from four to six inches apart, in rows spaced 12-36 inches apart. Insecticide spread in the trench before covering will discourage underground insects. Before glads bloom, hilling soil six inches up around the stalk helps prevent the glads from tipping over during storms. If drainage is a problem in your soil, rows should be raised to facilitate the process. Soggy, compacted soil will hamper root growth and contribute to root rot.
Watering:
Remember that glads need plenty of water, but will not tolerate wet feet. Lack of water inhibits spike growth, flower development and bulb growth. At least an inch of water per week is a good guideline.
Fertilization During Growing:
Before starting any fertilization program, always test the soil for nutrient content. The application of fertilizer should coincide with crop needs. We recommend starting fertilization when the third or fourth leaf is visible. Amounts will vary according to the soil test, but for poor, light soil you may use a fertilizer of 5-10-10 again, or just nitrogen if the nutrient content of your soil is balanced. You would apply this as a side dressing.
Weed and Insect Control:
Weed by shallow cultivation and hand weeding. If available, a light mulch of straw, grass clippings, etc. between rows will discourage weeds and help conserve moisture. Insect control is important in growing glads. Pests include thrip, which is by far the most damaging. Thrip are tiny insects, tan to black in color and less than 1/8” in length. They can be controlled by several good combination sprays and dusts, including organic products, and are available at your local garden centers. If you chose organic products, more frequent applications will be needed.
Digging Corms (Bulbs):
If you live where the ground does not freeze in the winter, you may choose not to dig your corms; however, disease and crowding may reduce the amount and quality of your bloom. You should remove plant tops 6-8 weeks after bloom and remove them from the garden to prevent the spread of disease. It is suggested that you dig and divide your corms every couple of years, being sure to discard any damaged or diseased corms. If you live where the ground freezes, you will need to dig your corms each year, or if you choose not to dig, purchase new corms in the spring. Corms should be lifted in the fall before the onset of freezing weather. About 6-8 weeks after blooming, the corms may be harvested by loosening the soil with a spade or digging fork so that the plants can be pulled up by hand. The plant should be separated from the corm as close to the corm as possible, either by hand breaking or by cutting with pruning shears. You should remove the old plant tops from the field to prevent carryover of disease. The corms should be cleaned or rinsed off with running water, and then spread out to dry in shallow layers in trays or porous bags in an airy location that will not freeze for a period of 2 to 3 weeks. During this time a cork layer forms between the new corm and the old mother corm and roots. Break off and discard this old corm as soon as possible. Undue delay in cleaning results in greater difficulty in removal of the old corm.
Corm Storage:
After cleaning, corms should be lightly dusted with a combination fungicide/insecticide dust, placed in shallow trays, mesh bags or open paper bags to be stored for the winter. Do not use any covering material. A well-ventilated root cellar is ideal, but any room with good air circulation in the average home basement will suffice if temperatures can be kept between 35-50 degrees. The lower temperature is best, as long as they do not freeze.
More DetailsPlanting
Bearded iris grow best in well-drained soil. Sloped or raised beds help ensure good drainage. Coarse sand or humus may be added to improve drainage. The ideal soil pH is 6.8 (slightly acidic). Iris do best with at least 6 hours a day of full sun. Insufficient sunlight will result in iris producing foliage, but no blooms.
When to Plant
For best results, iris should be planted at least six weeks before the first hard frost in your area. Establishing a good root system before the growing season ends is imperative.
Planting
Plant iris so the tops of the rhizomes are exposed and the roots are spread out facing downward into the soil. In very light soil or extremely hot climates, covering the rhizome with a light covering of soil by be used to shade the rhizome and prevent scorching. A common mistake is to plant bearded iris too deep. Ideally, the tops of the rhizomes should be visible above the soil level. Bearded iris planted 12 to 24 inches apart will require less frequent thinning. Watering in newly planted rhizomes will help settle the soil and encourage root growth.
Watering
Moisture helps establish root systems of newly planted rhizomes. Deep watering at long intervals is preferred to frequent shallow waterings. Unless the growing area is very dry, iris don’t need to be regularly watered. Over-watering is a common error.
Fertilizer
Use only a low-nitrogen fertilizer (6-10-10), bone meal or superphospate. A light application in the spring when springs bulbs such as tulips are blooming and a second light application about a month later is all the is required. Avoid the use of anything high in nitrogen. Over feeding iris with anything high in nitrogen will prevent the plant from producing blooms.
Growing Iris in Containers
Use a roomy pot with good drainage. Bearded iris need a one gallon pot or larger. Fill to one inch below the rim of the container with well-draining soil that is low in nitrogen. Plant rhizomes so that the tops of the rhizomes are exposed. Water only when the top two inches of soil are dry. Over-watering will encourage rot. Containers can be over-wintered outdoors, but protect pots from freezing by moving into an unheated garage or other unheated, protected location when sustained daytime temperatures are below 32F or nighttime temperatures are below 25F. In climates with harsh winter weather, sink the pot into the soil and cover with mulch. Divide and transplant iris every few years or as they begin overcrowding the pot.
More DetailsPlanting
Bearded iris grow best in well-drained soil. Sloped or raised beds help ensure good drainage. Coarse sand or humus may be added to improve drainage. The ideal soil pH is 6.8 (slightly acidic). Iris do best with at least 6 hours a day of full sun. Insufficient sunlight will result in iris producing foliage, but no blooms.
When to Plant
For best results, iris should be planted at least six weeks before the first hard frost in your area. Establishing a good root system before the growing season ends is imperative.
Planting
Plant iris so the tops of the rhizomes are exposed and the roots are spread out facing downward into the soil. In very light soil or extremely hot climates, covering the rhizome with a light covering of soil by be used to shade the rhizome and prevent scorching. A common mistake is to plant bearded iris too deep. Ideally, the tops of the rhizomes should be visible above the soil level. Bearded iris planted 12 to 24 inches apart will require less frequent thinning. Watering in newly planted rhizomes will help settle the soil and encourage root growth.
Watering
Moisture helps establish root systems of newly planted rhizomes. Deep watering at long intervals is preferred to frequent shallow waterings. Unless the growing area is very dry, iris don’t need to be regularly watered. Over-watering is a common error.
Fertilizer
Use only a low-nitrogen fertilizer (6-10-10), bone meal or superphospate. A light application in the spring when springs bulbs such as tulips are blooming and a second light application about a month later is all the is required. Avoid the use of anything high in nitrogen. Over feeding iris with anything high in nitrogen will prevent the plant from producing blooms.
Growing Iris in Containers
Use a roomy pot with good drainage. Bearded iris need a one gallon pot or larger. Fill to one inch below the rim of the container with well-draining soil that is low in nitrogen. Plant rhizomes so that the tops of the rhizomes are exposed. Water only when the top two inches of soil are dry. Over-watering will encourage rot. Containers can be over-wintered outdoors, but protect pots from freezing by moving into an unheated garage or other unheated, protected location when sustained daytime temperatures are below 32F or nighttime temperatures are below 25F. In climates with harsh winter weather, sink the pot into the soil and cover with mulch. Divide and transplant iris every few years or as they begin overcrowding the pot.
More DetailsPlanting
Bearded iris grow best in well-drained soil. Sloped or raised beds help ensure good drainage. Coarse sand or humus may be added to improve drainage. The ideal soil pH is 6.8 (slightly acidic). Iris do best with at least 6 hours a day of full sun. Insufficient sunlight will result in iris producing foliage, but no blooms.
When to Plant
For best results, iris should be planted at least six weeks before the first hard frost in your area. Establishing a good root system before the growing season ends is imperative.
Planting
Plant iris so the tops of the rhizomes are exposed and the roots are spread out facing downward into the soil. In very light soil or extremely hot climates, covering the rhizome with a light covering of soil by be used to shade the rhizome and prevent scorching. A common mistake is to plant bearded iris too deep. Ideally, the tops of the rhizomes should be visible above the soil level. Bearded iris planted 12 to 24 inches apart will require less frequent thinning. Watering in newly planted rhizomes will help settle the soil and encourage root growth.
Watering
Moisture helps establish root systems of newly planted rhizomes. Deep watering at long intervals is preferred to frequent shallow waterings. Unless the growing area is very dry, iris don’t need to be regularly watered. Over-watering is a common error.
Fertilizer
Use only a low-nitrogen fertilizer (6-10-10), bone meal or superphospate. A light application in the spring when springs bulbs such as tulips are blooming and a second light application about a month later is all the is required. Avoid the use of anything high in nitrogen. Over feeding iris with anything high in nitrogen will prevent the plant from producing blooms.
Growing Iris in Containers
Use a roomy pot with good drainage. Bearded iris need a one gallon pot or larger. Fill to one inch below the rim of the container with well-draining soil that is low in nitrogen. Plant rhizomes so that the tops of the rhizomes are exposed. Water only when the top two inches of soil are dry. Over-watering will encourage rot. Containers can be over-wintered outdoors, but protect pots from freezing by moving into an unheated garage or other unheated, protected location when sustained daytime temperatures are below 32F or nighttime temperatures are below 25F. In climates with harsh winter weather, sink the pot into the soil and cover with mulch. Divide and transplant iris every few years or as they begin overcrowding the pot.
More DetailsPlanting
Bearded iris grow best in well-drained soil. Sloped or raised beds help ensure good drainage. Coarse sand or humus may be added to improve drainage. The ideal soil pH is 6.8 (slightly acidic). Iris do best with at least 6 hours a day of full sun. Insufficient sunlight will result in iris producing foliage, but no blooms.
When to Plant
For best results, iris should be planted at least six weeks before the first hard frost in your area. Establishing a good root system before the growing season ends is imperative.
Planting
Plant iris so the tops of the rhizomes are exposed and the roots are spread out facing downward into the soil. In very light soil or extremely hot climates, covering the rhizome with a light covering of soil by be used to shade the rhizome and prevent scorching. A common mistake is to plant bearded iris too deep. Ideally, the tops of the rhizomes should be visible above the soil level. Bearded iris planted 12 to 24 inches apart will require less frequent thinning. Watering in newly planted rhizomes will help settle the soil and encourage root growth.
Watering
Moisture helps establish root systems of newly planted rhizomes. Deep watering at long intervals is preferred to frequent shallow waterings. Unless the growing area is very dry, iris don’t need to be regularly watered. Over-watering is a common error.
Fertilizer
Use only a low-nitrogen fertilizer (6-10-10), bone meal or superphospate. A light application in the spring when springs bulbs such as tulips are blooming and a second light application about a month later is all the is required. Avoid the use of anything high in nitrogen. Over feeding iris with anything high in nitrogen will prevent the plant from producing blooms.
Growing Iris in Containers
Use a roomy pot with good drainage. Bearded iris need a one gallon pot or larger. Fill to one inch below the rim of the container with well-draining soil that is low in nitrogen. Plant rhizomes so that the tops of the rhizomes are exposed. Water only when the top two inches of soil are dry. Over-watering will encourage rot. Containers can be over-wintered outdoors, but protect pots from freezing by moving into an unheated garage or other unheated, protected location when sustained daytime temperatures are below 32F or nighttime temperatures are below 25F. In climates with harsh winter weather, sink the pot into the soil and cover with mulch. Divide and transplant iris every few years or as they begin overcrowding the pot.
More DetailsPlanting
Bearded iris grow best in well-drained soil. Sloped or raised beds help ensure good drainage. Coarse sand or humus may be added to improve drainage. The ideal soil pH is 6.8 (slightly acidic). Iris do best with at least 6 hours a day of full sun. Insufficient sunlight will result in iris producing foliage, but no blooms.
When to Plant
For best results, iris should be planted at least six weeks before the first hard frost in your area. Establishing a good root system before the growing season ends is imperative.
Planting
Plant iris so the tops of the rhizomes are exposed and the roots are spread out facing downward into the soil. In very light soil or extremely hot climates, covering the rhizome with a light covering of soil by be used to shade the rhizome and prevent scorching. A common mistake is to plant bearded iris too deep. Ideally, the tops of the rhizomes should be visible above the soil level. Bearded iris planted 12 to 24 inches apart will require less frequent thinning. Watering in newly planted rhizomes will help settle the soil and encourage root growth.
Watering
Moisture helps establish root systems of newly planted rhizomes. Deep watering at long intervals is preferred to frequent shallow waterings. Unless the growing area is very dry, iris don’t need to be regularly watered. Over-watering is a common error.
Fertilizer
Use only a low-nitrogen fertilizer (6-10-10), bone meal or superphospate. A light application in the spring when springs bulbs such as tulips are blooming and a second light application about a month later is all the is required. Avoid the use of anything high in nitrogen. Over feeding iris with anything high in nitrogen will prevent the plant from producing blooms.
Growing Iris in Containers
Use a roomy pot with good drainage. Bearded iris need a one gallon pot or larger. Fill to one inch below the rim of the container with well-draining soil that is low in nitrogen. Plant rhizomes so that the tops of the rhizomes are exposed. Water only when the top two inches of soil are dry. Over-watering will encourage rot. Containers can be over-wintered outdoors, but protect pots from freezing by moving into an unheated garage or other unheated, protected location when sustained daytime temperatures are below 32F or nighttime temperatures are below 25F. In climates with harsh winter weather, sink the pot into the soil and cover with mulch. Divide and transplant iris every few years or as they begin overcrowding the pot.
More DetailsPlanting
Bearded iris grow best in well-drained soil. Sloped or raised beds help ensure good drainage. Coarse sand or humus may be added to improve drainage. The ideal soil pH is 6.8 (slightly acidic). Iris do best with at least 6 hours a day of full sun. Insufficient sunlight will result in iris producing foliage, but no blooms.
When to Plant
For best results, iris should be planted at least six weeks before the first hard frost in your area. Establishing a good root system before the growing season ends is imperative.
Planting
Plant iris so the tops of the rhizomes are exposed and the roots are spread out facing downward into the soil. In very light soil or extremely hot climates, covering the rhizome with a light covering of soil by be used to shade the rhizome and prevent scorching. A common mistake is to plant bearded iris too deep. Ideally, the tops of the rhizomes should be visible above the soil level. Bearded iris planted 12 to 24 inches apart will require less frequent thinning. Watering in newly planted rhizomes will help settle the soil and encourage root growth.
Watering
Moisture helps establish root systems of newly planted rhizomes. Deep watering at long intervals is preferred to frequent shallow waterings. Unless the growing area is very dry, iris don’t need to be regularly watered. Over-watering is a common error.
Fertilizer
Use only a low-nitrogen fertilizer (6-10-10), bone meal or superphospate. A light application in the spring when springs bulbs such as tulips are blooming and a second light application about a month later is all the is required. Avoid the use of anything high in nitrogen. Over feeding iris with anything high in nitrogen will prevent the plant from producing blooms.
Growing Iris in Containers
Use a roomy pot with good drainage. Bearded iris need a one gallon pot or larger. Fill to one inch below the rim of the container with well-draining soil that is low in nitrogen. Plant rhizomes so that the tops of the rhizomes are exposed. Water only when the top two inches of soil are dry. Over-watering will encourage rot. Containers can be over-wintered outdoors, but protect pots from freezing by moving into an unheated garage or other unheated, protected location when sustained daytime temperatures are below 32F or nighttime temperatures are below 25F. In climates with harsh winter weather, sink the pot into the soil and cover with mulch. Divide and transplant iris every few years or as they begin overcrowding the pot.
More DetailsPlanting
Bearded iris grow best in well-drained soil. Sloped or raised beds help ensure good drainage. Coarse sand or humus may be added to improve drainage. The ideal soil pH is 6.8 (slightly acidic). Iris do best with at least 6 hours a day of full sun. Insufficient sunlight will result in iris producing foliage, but no blooms.
When to Plant
For best results, iris should be planted at least six weeks before the first hard frost in your area. Establishing a good root system before the growing season ends is imperative.
Planting
Plant iris so the tops of the rhizomes are exposed and the roots are spread out facing downward into the soil. In very light soil or extremely hot climates, covering the rhizome with a light covering of soil by be used to shade the rhizome and prevent scorching. A common mistake is to plant bearded iris too deep. Ideally, the tops of the rhizomes should be visible above the soil level. Bearded iris planted 12 to 24 inches apart will require less frequent thinning. Watering in newly planted rhizomes will help settle the soil and encourage root growth.
Watering
Moisture helps establish root systems of newly planted rhizomes. Deep watering at long intervals is preferred to frequent shallow waterings. Unless the growing area is very dry, iris don’t need to be regularly watered. Over-watering is a common error.
Fertilizer
Use only a low-nitrogen fertilizer (6-10-10), bone meal or superphospate. A light application in the spring when springs bulbs such as tulips are blooming and a second light application about a month later is all the is required. Avoid the use of anything high in nitrogen. Over feeding iris with anything high in nitrogen will prevent the plant from producing blooms.
Growing Iris in Containers
Use a roomy pot with good drainage. Bearded iris need a one gallon pot or larger. Fill to one inch below the rim of the container with well-draining soil that is low in nitrogen. Plant rhizomes so that the tops of the rhizomes are exposed. Water only when the top two inches of soil are dry. Over-watering will encourage rot. Containers can be over-wintered outdoors, but protect pots from freezing by moving into an unheated garage or other unheated, protected location when sustained daytime temperatures are below 32F or nighttime temperatures are below 25F. In climates with harsh winter weather, sink the pot into the soil and cover with mulch. Divide and transplant iris every few years or as they begin overcrowding the pot.
More DetailsPlanting
Bearded iris grow best in well-drained soil. Sloped or raised beds help ensure good drainage. Coarse sand or humus may be added to improve drainage. The ideal soil pH is 6.8 (slightly acidic). Iris do best with at least 6 hours a day of full sun. Insufficient sunlight will result in iris producing foliage, but no blooms.
When to Plant
For best results, iris should be planted at least six weeks before the first hard frost in your area. Establishing a good root system before the growing season ends is imperative.
Planting
Plant iris so the tops of the rhizomes are exposed and the roots are spread out facing downward into the soil. In very light soil or extremely hot climates, covering the rhizome with a light covering of soil by be used to shade the rhizome and prevent scorching. A common mistake is to plant bearded iris too deep. Ideally, the tops of the rhizomes should be visible above the soil level. Bearded iris planted 12 to 24 inches apart will require less frequent thinning. Watering in newly planted rhizomes will help settle the soil and encourage root growth.
Watering
Moisture helps establish root systems of newly planted rhizomes. Deep watering at long intervals is preferred to frequent shallow waterings. Unless the growing area is very dry, iris don’t need to be regularly watered. Over-watering is a common error.
Fertilizer
Use only a low-nitrogen fertilizer (6-10-10), bone meal or superphospate. A light application in the spring when springs bulbs such as tulips are blooming and a second light application about a month later is all the is required. Avoid the use of anything high in nitrogen. Over feeding iris with anything high in nitrogen will prevent the plant from producing blooms.
Growing Iris in Containers
Use a roomy pot with good drainage. Bearded iris need a one gallon pot or larger. Fill to one inch below the rim of the container with well-draining soil that is low in nitrogen. Plant rhizomes so that the tops of the rhizomes are exposed. Water only when the top two inches of soil are dry. Over-watering will encourage rot. Containers can be over-wintered outdoors, but protect pots from freezing by moving into an unheated garage or other unheated, protected location when sustained daytime temperatures are below 32F or nighttime temperatures are below 25F. In climates with harsh winter weather, sink the pot into the soil and cover with mulch. Divide and transplant iris every few years or as they begin overcrowding the pot.
More DetailsPlanting
Bearded iris grow best in well-drained soil. Sloped or raised beds help ensure good drainage. Coarse sand or humus may be added to improve drainage. The ideal soil pH is 6.8 (slightly acidic). Iris do best with at least 6 hours a day of full sun. Insufficient sunlight will result in iris producing foliage, but no blooms.
When to Plant
For best results, iris should be planted at least six weeks before the first hard frost in your area. Establishing a good root system before the growing season ends is imperative.
Planting
Plant iris so the tops of the rhizomes are exposed and the roots are spread out facing downward into the soil. In very light soil or extremely hot climates, covering the rhizome with a light covering of soil by be used to shade the rhizome and prevent scorching. A common mistake is to plant bearded iris too deep. Ideally, the tops of the rhizomes should be visible above the soil level. Bearded iris planted 12 to 24 inches apart will require less frequent thinning. Watering in newly planted rhizomes will help settle the soil and encourage root growth.
Watering
Moisture helps establish root systems of newly planted rhizomes. Deep watering at long intervals is preferred to frequent shallow waterings. Unless the growing area is very dry, iris don’t need to be regularly watered. Over-watering is a common error.
Fertilizer
Use only a low-nitrogen fertilizer (6-10-10), bone meal or superphospate. A light application in the spring when springs bulbs such as tulips are blooming and a second light application about a month later is all the is required. Avoid the use of anything high in nitrogen. Over feeding iris with anything high in nitrogen will prevent the plant from producing blooms.
Growing Iris in Containers
Use a roomy pot with good drainage. Bearded iris need a one gallon pot or larger. Fill to one inch below the rim of the container with well-draining soil that is low in nitrogen. Plant rhizomes so that the tops of the rhizomes are exposed. Water only when the top two inches of soil are dry. Over-watering will encourage rot. Containers can be over-wintered outdoors, but protect pots from freezing by moving into an unheated garage or other unheated, protected location when sustained daytime temperatures are below 32F or nighttime temperatures are below 25F. In climates with harsh winter weather, sink the pot into the soil and cover with mulch. Divide and transplant iris every few years or as they begin overcrowding the pot.
More DetailsPlanting
Plant corms 5 inches deep, with spacing of 2-3 inches. Can also grow in containers with up to 6 corms in a 6 inch pot. Keep moist during growing season, but allow dry out after plants stop blooming in mid-summer. Corms can be dug up and overwintered in planting medium in a cool, dry area.
Soil
Best grown in well-draining soil with a high amount of organic matter.
Light
Grow in full sun to part shade.
More Details
On Arrival
After being programmed, forcers should be prepared to plant bulbs when they arrive. If they must be stored, place at 32-35° F. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE!!
Planting
In all cases, the planting media should be sterile, well drained, have a pH of 6.5 to 7.5 with pH of 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. Dip for 30 minutes with one of the three following recommended formulas:
For potted plants, use standard pots and plant bulbs so there is 2 inches of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of Bulbs Per Pot
12/14 cm. 3 per 6 inch (15 cm) pot
14/16 cm. 1-2 per 6 inch (15 cm) pot
16/18 cm. 1 per 6 inch (15 cm) pot
Light
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have lowlight intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. Use light 4-8 hours per day. When very high light conditions occur (spring/summer), screening or shading is advised.
Watering
Water the planting medium thoroughly after planting and then keep the medium moist, but not wet.
Growing in the Summertime
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Temperature
Use 55-63°F night temperatures and not higher than 70°F day temperatures. Avoid great fluctuations in temperature, because this can help to promote leaf scorch. Whenever possible, start Orientals at 59°F for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65°F) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower after they reach the visible bud stage of development and Orientals take 50-55 days. When seasonally warm temperatures occur, try to keep the soil and air temperatures below 68° F. Use shading when necessary.
Ventilation
Use a well ventilated greenhouse. Do not permit humidity to build up.
Fertilizer
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks. A well fertilized lily tends to be shorter than an under fertilized plant.
Plant Growth Retardants
Height control is one of the more difficult aspects of pot lily forcing. Forcers need to rely greatly on their past experiences with the various cultivars and then decide whether or not to use ancymidol (A'Rest), Bonzi, Sumagic, or any other approved growth retardant. If soil drenches are to be used, split applications are usually best. Also, the pH of the medium needs to be about 7.0 to get the most effective response of the soil drenches, particularly for A'Rest. The first to be applied at shoot emergence, the second 10-14 days later. Foliar sprays can also be used. In addition there has been research conducted on preplant bulb dips. If EPA approved, forcers should experiment with the procedure to determine the best rate and length of the bulb dip to use for their forcing conditions and cultivars used.
Marketing and Storage
Forcers - plants should be marketed as soon as first flower begins to color. This insures that the consumer will receive maximum enjoyment. Care must be taken not to damage the unopened buds during marketing. Storage should be kept to a minimum. If they must be stored, place them at 35-40°F when the first flower is fully colored, but not open.
According to Cornell University trials a 50 ppm application of facination 2 days before storage will prevent leaves from yellowing.
More DetailsOn Arrival
After being programmed, forcers should be prepared to plant bulbs when they arrive. If they must be stored, place at 32-35° F. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE!!
Planting
In all cases, the planting media should be sterile, well drained, have a pH of 6.5 to 7.5 with pH of 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. Dip for 30 minutes with one of the three following recommended formulas:
For potted plants, use standard pots and plant bulbs so there is 2 inches of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of Bulbs Per Pot
12/14 cm. 3 per 6 inch (15 cm) pot
14/16 cm. 1-2 per 6 inch (15 cm) pot
16/18 cm. 1 per 6 inch (15 cm) pot
Light
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have lowlight intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. Use light 4-8 hours per day. When very high light conditions occur (spring/summer), screening or shading is advised.
Watering
Water the planting medium thoroughly after planting and then keep the medium moist, but not wet.
Growing in the Summertime
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Temperature
Use 55-63°F night temperatures and not higher than 70°F day temperatures. Avoid great fluctuations in temperature, because this can help to promote leaf scorch. Whenever possible, start Orientals at 59°F for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65°F) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower after they reach the visible bud stage of development and Orientals take 50-55 days. When seasonally warm temperatures occur, try to keep the soil and air temperatures below 68° F. Use shading when necessary.
Ventilation
Use a well ventilated greenhouse. Do not permit humidity to build up.
Fertilizer
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks. A well fertilized lily tends to be shorter than an under fertilized plant.
Plant Growth Retardants
Height control is one of the more difficult aspects of pot lily forcing. Forcers need to rely greatly on their past experiences with the various cultivars and then decide whether or not to use ancymidol (A'Rest), Bonzi, Sumagic, or any other approved growth retardant. If soil drenches are to be used, split applications are usually best. Also, the pH of the medium needs to be about 7.0 to get the most effective response of the soil drenches, particularly for A'Rest. The first to be applied at shoot emergence, the second 10-14 days later. Foliar sprays can also be used. In addition there has been research conducted on preplant bulb dips. If EPA approved, forcers should experiment with the procedure to determine the best rate and length of the bulb dip to use for their forcing conditions and cultivars used.
Marketing and Storage
Forcers - plants should be marketed as soon as first flower begins to color. This insures that the consumer will receive maximum enjoyment. Care must be taken not to damage the unopened buds during marketing. Storage should be kept to a minimum. If they must be stored, place them at 35-40°F when the first flower is fully colored, but not open.
According to Cornell University trials a 50 ppm application of facination 2 days before storage will prevent leaves from yellowing.
More DetailsOn Arrival
After being programmed, forcers should be prepared to plant bulbs when they arrive. If they must be stored, place at 32-35° F. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE!!
Planting
In all cases, the planting media should be sterile, well drained, have a pH of 6.5 to 7.5 with pH of 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. Dip for 30 minutes with one of the three following recommended formulas:
For potted plants, use standard pots and plant bulbs so there is 2 inches of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of Bulbs Per Pot
12/14 cm. 3 per 6 inch (15 cm) pot
14/16 cm. 1-2 per 6 inch (15 cm) pot
16/18 cm. 1 per 6 inch (15 cm) pot
Light
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have lowlight intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. Use light 4-8 hours per day. When very high light conditions occur (spring/summer), screening or shading is advised.
Watering
Water the planting medium thoroughly after planting and then keep the medium moist, but not wet.
Growing in the Summertime
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Temperature
Use 55-63°F night temperatures and not higher than 70°F day temperatures. Avoid great fluctuations in temperature, because this can help to promote leaf scorch. Whenever possible, start Orientals at 59°F for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65°F) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower after they reach the visible bud stage of development and Orientals take 50-55 days. When seasonally warm temperatures occur, try to keep the soil and air temperatures below 68° F. Use shading when necessary.
Ventilation
Use a well ventilated greenhouse. Do not permit humidity to build up.
Fertilizer
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks. A well fertilized lily tends to be shorter than an under fertilized plant.
Plant Growth Retardants
Height control is one of the more difficult aspects of pot lily forcing. Forcers need to rely greatly on their past experiences with the various cultivars and then decide whether or not to use ancymidol (A'Rest), Bonzi, Sumagic, or any other approved growth retardant. If soil drenches are to be used, split applications are usually best. Also, the pH of the medium needs to be about 7.0 to get the most effective response of the soil drenches, particularly for A'Rest. The first to be applied at shoot emergence, the second 10-14 days later. Foliar sprays can also be used. In addition there has been research conducted on preplant bulb dips. If EPA approved, forcers should experiment with the procedure to determine the best rate and length of the bulb dip to use for their forcing conditions and cultivars used.
Marketing and Storage
Forcers - plants should be marketed as soon as first flower begins to color. This insures that the consumer will receive maximum enjoyment. Care must be taken not to damage the unopened buds during marketing. Storage should be kept to a minimum. If they must be stored, place them at 35-40°F when the first flower is fully colored, but not open.
According to Cornell University trials a 50 ppm application of facination 2 days before storage will prevent leaves from yellowing.
More DetailsAsiatic and Oriental hybrid lily bulbs used for cut flower forcing can be forced on a year-round basis by using a combination of
precooled and frozen-in bulbs. The number of cultivars available is constantly changing. Generally, the asiatics force in 8-10 weeks.
Oriental and auratum lilies force in 12-15 weeks and are available until June 30th.
On Arrival
After being programmed, forcers should be prepared to plant bulbs immediately on arrival. If they must be stored, place them at 32-35 ° F. Storage at higher temperatures will cause desiccation of the bulbs which will result in fewer flowers per stem. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE.
Planting and Spacing
The planting medium should be sterile, well drained and have a pH of 5.5 to 7.5 with pH 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. If ground beds or raised benches are used, be certain to sterilize them and be sure they are low in soluble salts. Leaching may be necessary. They must be well drained. Bulbs for cut flowers can be planted in ground beds, 8-10" deep raised beds or standard pots. Plant bulbs with at least 2" of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of bulbs for Cut Flower Forcing in Beds or Raised Benches
Support System
Because of their length and variation in stem strength, some cut lily cultivars may need wire support systems. If used, be certain the netting has holes large enough to accommodate easy cutting and removal of the flowers. Also, place the netting over the bulbs directly after planting.
Watering
Water the planting medium thoroughly after planting and then keep the medium moist but not wet.
Light
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances, lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have low light intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. When very high light condition occur (spring/summer), screening or shading is advised. Extremely high light intensities can reduce the length of the cut flower.
Use 55-63° F (13-17° C) night temperatures and not higher than 70° F (21° C) day temperatures. Avoid great fluctuations in temperature,
because this can help to promote leaf scorch. Also, whenever possible, start Orientals at 59° F (15° C) for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65° F/17-18° C) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower
after they reach the visible bud stage of development and Orientals take 50-55 days. Lastly, when seasonally warm temperatures occur,
try to keep the soil and air temperatures below 68° F (20° C). Mulching of ground or raised bed and shading are advised.
ground or raised bed and shading are advised. Use a well ventilated greenhouse. Do not permit humidity to build up.
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations
suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the
medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm
to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks.
Growing in the Summertime
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Marketing, Harvesting and Storage
Forcers - as soon as the first flower has fully developed color, but is not open, the plants should be cut. Care must be taken not
to damage the unopened buds during marketing. Whenever possible, lilies should not be stored.
Asiatic and Oriental hybrid lily bulbs used for cut flower forcing can be forced on a year-round basis by using a combination of
precooled and frozen-in bulbs. The number of cultivars available is constantly changing. Generally, the asiatics force in 8-10 weeks.
Oriental and auratum lilies force in 12-15 weeks and are available until June 30th.
On Arrival
After being programmed, forcers should be prepared to plant bulbs immediately on arrival. If they must be stored, place them at 32-35 ° F. Storage at higher temperatures will cause desiccation of the bulbs which will result in fewer flowers per stem. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE.
Planting and Spacing
The planting medium should be sterile, well drained and have a pH of 5.5 to 7.5 with pH 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. If ground beds or raised benches are used, be certain to sterilize them and be sure they are low in soluble salts. Leaching may be necessary. They must be well drained. Bulbs for cut flowers can be planted in ground beds, 8-10" deep raised beds or standard pots. Plant bulbs with at least 2" of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of bulbs for Cut Flower Forcing in Beds or Raised Benches
Support System
Because of their length and variation in stem strength, some cut lily cultivars may need wire support systems. If used, be certain the netting has holes large enough to accommodate easy cutting and removal of the flowers. Also, place the netting over the bulbs directly after planting.
Watering
Water the planting medium thoroughly after planting and then keep the medium moist but not wet.
Light
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances, lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have low light intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. When very high light condition occur (spring/summer), screening or shading is advised. Extremely high light intensities can reduce the length of the cut flower.
Use 55-63° F (13-17° C) night temperatures and not higher than 70° F (21° C) day temperatures. Avoid great fluctuations in temperature,
because this can help to promote leaf scorch. Also, whenever possible, start Orientals at 59° F (15° C) for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65° F/17-18° C) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower
after they reach the visible bud stage of development and Orientals take 50-55 days. Lastly, when seasonally warm temperatures occur,
try to keep the soil and air temperatures below 68° F (20° C). Mulching of ground or raised bed and shading are advised.
ground or raised bed and shading are advised. Use a well ventilated greenhouse. Do not permit humidity to build up.
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations
suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the
medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm
to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks.
Growing in the Summertime
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Marketing, Harvesting and Storage
Forcers - as soon as the first flower has fully developed color, but is not open, the plants should be cut. Care must be taken not
to damage the unopened buds during marketing. Whenever possible, lilies should not be stored.
Asiatic and Oriental hybrid lily bulbs used for cut flower forcing can be forced on a year-round basis by using a combination of
precooled and frozen-in bulbs. The number of cultivars available is constantly changing. Generally, the asiatics force in 8-10 weeks.
Oriental and auratum lilies force in 12-15 weeks and are available until June 30th.
On Arrival
After being programmed, forcers should be prepared to plant bulbs immediately on arrival. If they must be stored, place them at 32-35 ° F. Storage at higher temperatures will cause desiccation of the bulbs which will result in fewer flowers per stem. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE.
Planting and Spacing
The planting medium should be sterile, well drained and have a pH of 5.5 to 7.5 with pH 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. If ground beds or raised benches are used, be certain to sterilize them and be sure they are low in soluble salts. Leaching may be necessary. They must be well drained. Bulbs for cut flowers can be planted in ground beds, 8-10" deep raised beds or standard pots. Plant bulbs with at least 2" of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of bulbs for Cut Flower Forcing in Beds or Raised Benches
Support System
Because of their length and variation in stem strength, some cut lily cultivars may need wire support systems. If used, be certain the netting has holes large enough to accommodate easy cutting and removal of the flowers. Also, place the netting over the bulbs directly after planting.
Watering
Water the planting medium thoroughly after planting and then keep the medium moist but not wet.
Light
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances, lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have low light intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. When very high light condition occur (spring/summer), screening or shading is advised. Extremely high light intensities can reduce the length of the cut flower.
Use 55-63° F (13-17° C) night temperatures and not higher than 70° F (21° C) day temperatures. Avoid great fluctuations in temperature,
because this can help to promote leaf scorch. Also, whenever possible, start Orientals at 59° F (15° C) for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65° F/17-18° C) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower
after they reach the visible bud stage of development and Orientals take 50-55 days. Lastly, when seasonally warm temperatures occur,
try to keep the soil and air temperatures below 68° F (20° C). Mulching of ground or raised bed and shading are advised.
ground or raised bed and shading are advised. Use a well ventilated greenhouse. Do not permit humidity to build up.
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations
suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the
medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm
to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks.
Growing in the Summertime
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Marketing, Harvesting and Storage
Forcers - as soon as the first flower has fully developed color, but is not open, the plants should be cut. Care must be taken not
to damage the unopened buds during marketing. Whenever possible, lilies should not be stored.
On Arrival
After being programmed, forcers should be prepared to plant bulbs when they arrive. If they must be stored, place at 32-35° F. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE!!
Planting
In all cases, the planting media should be sterile, well drained, have a pH of 6.5 to 7.5 with pH of 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. Dip for 30 minutes with one of the three following recommended formulas:
For potted plants, use standard pots and plant bulbs so there is 2 inches of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of Bulbs Per Pot
12/14 cm. 3 per 6 inch (15 cm) pot
14/16 cm. 1-2 per 6 inch (15 cm) pot
16/18 cm. 1 per 6 inch (15 cm) pot
Light
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have lowlight intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. Use light 4-8 hours per day. When very high light conditions occur (spring/summer), screening or shading is advised.
Watering
Water the planting medium thoroughly after planting and then keep the medium moist, but not wet.
Growing in the Summertime
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Temperature
Use 55-63°F night temperatures and not higher than 70°F day temperatures. Avoid great fluctuations in temperature, because this can help to promote leaf scorch. Whenever possible, start Orientals at 59°F for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65°F) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower after they reach the visible bud stage of development and Orientals take 50-55 days. When seasonally warm temperatures occur, try to keep the soil and air temperatures below 68° F. Use shading when necessary.
Ventilation
Use a well ventilated greenhouse. Do not permit humidity to build up.
Fertilizer
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks. A well fertilized lily tends to be shorter than an under fertilized plant.
Plant Growth Retardants
Height control is one of the more difficult aspects of pot lily forcing. Forcers need to rely greatly on their past experiences with the various cultivars and then decide whether or not to use ancymidol (A'Rest), Bonzi, Sumagic, or any other approved growth retardant. If soil drenches are to be used, split applications are usually best. Also, the pH of the medium needs to be about 7.0 to get the most effective response of the soil drenches, particularly for A'Rest. The first to be applied at shoot emergence, the second 10-14 days later. Foliar sprays can also be used. In addition there has been research conducted on preplant bulb dips. If EPA approved, forcers should experiment with the procedure to determine the best rate and length of the bulb dip to use for their forcing conditions and cultivars used.
Marketing and Storage
Forcers - plants should be marketed as soon as first flower begins to color. This insures that the consumer will receive maximum enjoyment. Care must be taken not to damage the unopened buds during marketing. Storage should be kept to a minimum. If they must be stored, place them at 35-40°F when the first flower is fully colored, but not open.
According to Cornell University trials a 50 ppm application of facination 2 days before storage will prevent leaves from yellowing.
More DetailsOn Arrival
After being programmed, forcers should be prepared to plant bulbs when they arrive. If they must be stored, place at 32-35° F. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE!!
Planting
In all cases, the planting media should be sterile, well drained, have a pH of 6.5 to 7.5 with pH of 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. Dip for 30 minutes with one of the three following recommended formulas:
For potted plants, use standard pots and plant bulbs so there is 2 inches of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of Bulbs Per Pot
12/14 cm. 3 per 6 inch (15 cm) pot
14/16 cm. 1-2 per 6 inch (15 cm) pot
16/18 cm. 1 per 6 inch (15 cm) pot
Light
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have lowlight intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. Use light 4-8 hours per day. When very high light conditions occur (spring/summer), screening or shading is advised.
Watering
Water the planting medium thoroughly after planting and then keep the medium moist, but not wet.
Growing in the Summertime
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Temperature
Use 55-63°F night temperatures and not higher than 70°F day temperatures. Avoid great fluctuations in temperature, because this can help to promote leaf scorch. Whenever possible, start Orientals at 59°F for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65°F) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower after they reach the visible bud stage of development and Orientals take 50-55 days. When seasonally warm temperatures occur, try to keep the soil and air temperatures below 68° F. Use shading when necessary.
Ventilation
Use a well ventilated greenhouse. Do not permit humidity to build up.
Fertilizer
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks. A well fertilized lily tends to be shorter than an under fertilized plant.
Plant Growth Retardants
Height control is one of the more difficult aspects of pot lily forcing. Forcers need to rely greatly on their past experiences with the various cultivars and then decide whether or not to use ancymidol (A'Rest), Bonzi, Sumagic, or any other approved growth retardant. If soil drenches are to be used, split applications are usually best. Also, the pH of the medium needs to be about 7.0 to get the most effective response of the soil drenches, particularly for A'Rest. The first to be applied at shoot emergence, the second 10-14 days later. Foliar sprays can also be used. In addition there has been research conducted on preplant bulb dips. If EPA approved, forcers should experiment with the procedure to determine the best rate and length of the bulb dip to use for their forcing conditions and cultivars used.
Marketing and Storage
Forcers - plants should be marketed as soon as first flower begins to color. This insures that the consumer will receive maximum enjoyment. Care must be taken not to damage the unopened buds during marketing. Storage should be kept to a minimum. If they must be stored, place them at 35-40°F when the first flower is fully colored, but not open.
According to Cornell University trials a 50 ppm application of facination 2 days before storage will prevent leaves from yellowing.
More DetailsAsiatic and Oriental hybrid lily bulbs used for cut flower forcing can be forced on a year-round basis by using a combination of precooled and frozen-in bulbs. The number of cultivars available is constantly changing. Generally, the asiatics force in 8-10 weeks. Oriental and auratum lilies force in 12-15 weeks and are available until June 30th.
On Arrival
After being programmed, forcers should be prepared to plant bulbs immediately on arrival. If they must be stored, place them at 32-35 ° F. Storage at higher temperatures will cause desiccation of the bulbs which will result in fewer flowers per stem. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE.
Planting and Spacing
The planting medium should be sterile, well drained and have a pH of 5.5 to 7.5 with pH 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. If ground beds or raised benches are used, be certain to sterilize them and be sure they are low in soluble salts. Leaching may be necessary. They must be well drained. Bulbs for cut flowers can be planted in ground beds, 8-10" deep raised beds or standard pots. Plant bulbs with at least 2" of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of bulbs for Cut Flower Forcing in Beds or Raised Benches:
Asiatic Hybrids
12/14 cm 6-9 per sq ft
14/16 cm 5-8 per sq ft
Oriental Hybrids
16/18 cm 4-6 per sq ft
18/20 cm 4-5 per sq ft
Support System:
Because of their length and variation in stem strength, some cut lily cultivars may need wire support systems. If used, be certain the netting has holes large enough to accommodate easy cutting and removal of the flowers. Also, place the netting over the bulbs directly after planting.
Watering:
Water the planting medium thoroughly after planting and then keep the medium moist but not wet.
Light:
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have low light intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. When very high light condition occur (spring/summer), screening or shading is advised. Extremely high light intensities can reduce the length of the cut flower.
Use 55-63° F (13-17° C) night temperatures and not higher than 70° F (21° C) day temperatures. Avoid great fluctuations in temperature, because this can help to promote leaf scorch. Also, whenever possible, start Orientals at 59° F (15° C) for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65° F/17-18° C) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower after they reach the visible bud stage of development and Orientals take 50-55 days. Lastly, when seasonally warm temperatures occur, try to keep the soil and air temperatures below 68° F (20° C). Mulching of ground or raised bed and shading are advised. Ground or raised bed and shading are advised. Use a well ventilated greenhouse. Do not permit humidity to build up.
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks.
Growing in the Summertime:
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Marketing, Harvesting and Storage:
Forcers - as soon as the first flower has fully developed color, but is not open, the plants should be cut. Care must be taken not to damage the unopened buds during marketing. Whenever possible, lilies should not be stored.
More DetailsAsiatic and Oriental hybrid lily bulbs used for cut flower forcing can be forced on a year-round basis by using a combination of precooled and frozen-in bulbs. The number of cultivars available is constantly changing. Generally, the asiatics force in 8-10 weeks. Oriental and auratum lilies force in 12-15 weeks and are available until June 30th.
On Arrival
After being programmed, forcers should be prepared to plant bulbs immediately on arrival. If they must be stored, place them at 32-35 ° F. Storage at higher temperatures will cause desiccation of the bulbs which will result in fewer flowers per stem. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE.
Planting and Spacing
The planting medium should be sterile, well drained and have a pH of 5.5 to 7.5 with pH 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. If ground beds or raised benches are used, be certain to sterilize them and be sure they are low in soluble salts. Leaching may be necessary. They must be well drained. Bulbs for cut flowers can be planted in ground beds, 8-10" deep raised beds or standard pots. Plant bulbs with at least 2" of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of bulbs for Cut Flower Forcing in Beds or Raised Benches:
Asiatic Hybrids
12/14 cm 6-9 per sq ft
14/16 cm 5-8 per sq ft
Oriental Hybrids
16/18 cm 4-6 per sq ft
18/20 cm 4-5 per sq ft
Support System:
Because of their length and variation in stem strength, some cut lily cultivars may need wire support systems. If used, be certain the netting has holes large enough to accommodate easy cutting and removal of the flowers. Also, place the netting over the bulbs directly after planting.
Watering:
Water the planting medium thoroughly after planting and then keep the medium moist but not wet.
Light:
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have low light intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. When very high light condition occur (spring/summer), screening or shading is advised. Extremely high light intensities can reduce the length of the cut flower.
Use 55-63° F (13-17° C) night temperatures and not higher than 70° F (21° C) day temperatures. Avoid great fluctuations in temperature, because this can help to promote leaf scorch. Also, whenever possible, start Orientals at 59° F (15° C) for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65° F/17-18° C) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower after they reach the visible bud stage of development and Orientals take 50-55 days. Lastly, when seasonally warm temperatures occur, try to keep the soil and air temperatures below 68° F (20° C). Mulching of ground or raised bed and shading are advised. Ground or raised bed and shading are advised. Use a well ventilated greenhouse. Do not permit humidity to build up.
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks.
Growing in the Summertime:
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Marketing, Harvesting and Storage:
Forcers - as soon as the first flower has fully developed color, but is not open, the plants should be cut. Care must be taken not to damage the unopened buds during marketing. Whenever possible, lilies should not be stored.
More DetailsAsiatic and Oriental hybrid lily bulbs used for cut flower forcing can be forced on a year-round basis by using a combination of precooled and frozen-in bulbs. The number of cultivars available is constantly changing. Generally, the asiatics force in 8-10 weeks. Oriental and auratum lilies force in 12-15 weeks and are available until June 30th.
On Arrival
After being programmed, forcers should be prepared to plant bulbs immediately on arrival. If they must be stored, place them at 32-35 ° F. Storage at higher temperatures will cause desiccation of the bulbs which will result in fewer flowers per stem. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE.
Planting and Spacing
The planting medium should be sterile, well drained and have a pH of 5.5 to 7.5 with pH 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. If ground beds or raised benches are used, be certain to sterilize them and be sure they are low in soluble salts. Leaching may be necessary. They must be well drained. Bulbs for cut flowers can be planted in ground beds, 8-10" deep raised beds or standard pots. Plant bulbs with at least 2" of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of bulbs for Cut Flower Forcing in Beds or Raised Benches:
Asiatic Hybrids
12/14 cm 6-9 per sq ft
14/16 cm 5-8 per sq ft
Oriental Hybrids
16/18 cm 4-6 per sq ft
18/20 cm 4-5 per sq ft
Support System:
Because of their length and variation in stem strength, some cut lily cultivars may need wire support systems. If used, be certain the netting has holes large enough to accommodate easy cutting and removal of the flowers. Also, place the netting over the bulbs directly after planting.
Watering:
Water the planting medium thoroughly after planting and then keep the medium moist but not wet.
Light:
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have low light intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. When very high light condition occur (spring/summer), screening or shading is advised. Extremely high light intensities can reduce the length of the cut flower.
Use 55-63° F (13-17° C) night temperatures and not higher than 70° F (21° C) day temperatures. Avoid great fluctuations in temperature, because this can help to promote leaf scorch. Also, whenever possible, start Orientals at 59° F (15° C) for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65° F/17-18° C) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower after they reach the visible bud stage of development and Orientals take 50-55 days. Lastly, when seasonally warm temperatures occur, try to keep the soil and air temperatures below 68° F (20° C). Mulching of ground or raised bed and shading are advised. Ground or raised bed and shading are advised. Use a well ventilated greenhouse. Do not permit humidity to build up.
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks.
Growing in the Summertime:
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Marketing, Harvesting and Storage:
Forcers - as soon as the first flower has fully developed color, but is not open, the plants should be cut. Care must be taken not to damage the unopened buds during marketing. Whenever possible, lilies should not be stored.
More DetailsAsiatic and Oriental hybrid lily bulbs used for cut flower forcing can be forced on a year-round basis by using a combination of precooled and frozen-in bulbs. The number of cultivars available is constantly changing. Generally, the asiatics force in 8-10 weeks. Oriental and auratum lilies force in 12-15 weeks and are available until June 30th.
On Arrival
After being programmed, forcers should be prepared to plant bulbs immediately on arrival. If they must be stored, place them at 32-35 ° F. Storage at higher temperatures will cause desiccation of the bulbs which will result in fewer flowers per stem. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE.
Planting and Spacing
The planting medium should be sterile, well drained and have a pH of 5.5 to 7.5 with pH 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. If ground beds or raised benches are used, be certain to sterilize them and be sure they are low in soluble salts. Leaching may be necessary. They must be well drained. Bulbs for cut flowers can be planted in ground beds, 8-10" deep raised beds or standard pots. Plant bulbs with at least 2" of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of bulbs for Cut Flower Forcing in Beds or Raised Benches:
Asiatic Hybrids
12/14 cm 6-9 per sq ft
14/16 cm 5-8 per sq ft
Oriental Hybrids
16/18 cm 4-6 per sq ft
18/20 cm 4-5 per sq ft
Support System:
Because of their length and variation in stem strength, some cut lily cultivars may need wire support systems. If used, be certain the netting has holes large enough to accommodate easy cutting and removal of the flowers. Also, place the netting over the bulbs directly after planting.
Watering:
Water the planting medium thoroughly after planting and then keep the medium moist but not wet.
Light:
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have low light intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. When very high light condition occur (spring/summer), screening or shading is advised. Extremely high light intensities can reduce the length of the cut flower.
Use 55-63° F (13-17° C) night temperatures and not higher than 70° F (21° C) day temperatures. Avoid great fluctuations in temperature, because this can help to promote leaf scorch. Also, whenever possible, start Orientals at 59° F (15° C) for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65° F/17-18° C) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower after they reach the visible bud stage of development and Orientals take 50-55 days. Lastly, when seasonally warm temperatures occur, try to keep the soil and air temperatures below 68° F (20° C). Mulching of ground or raised bed and shading are advised. Ground or raised bed and shading are advised. Use a well ventilated greenhouse. Do not permit humidity to build up.
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks.
Growing in the Summertime:
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Marketing, Harvesting and Storage:
Forcers - as soon as the first flower has fully developed color, but is not open, the plants should be cut. Care must be taken not to damage the unopened buds during marketing. Whenever possible, lilies should not be stored.
More DetailsOn Arrival
After being programmed, forcers should be prepared to plant bulbs when they arrive. If they must be stored, place at 32-35° F. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE!!
Planting
In all cases, the planting media should be sterile, well drained, have a pH of 6.5 to 7.5 with pH of 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. Dip for 30 minutes with one of the three following recommended formulas:
For potted plants, use standard pots and plant bulbs so there is 2 inches of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of Bulbs Per Pot
12/14 cm. 3 per 6 inch (15 cm) pot
14/16 cm. 1-2 per 6 inch (15 cm) pot
16/18 cm. 1 per 6 inch (15 cm) pot
Light
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have lowlight intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. Use light 4-8 hours per day. When very high light conditions occur (spring/summer), screening or shading is advised.
Watering
Water the planting medium thoroughly after planting and then keep the medium moist, but not wet.
Growing in the Summertime
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Temperature
Use 55-63°F night temperatures and not higher than 70°F day temperatures. Avoid great fluctuations in temperature, because this can help to promote leaf scorch. Whenever possible, start Orientals at 59°F for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65°F) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower after they reach the visible bud stage of development and Orientals take 50-55 days. When seasonally warm temperatures occur, try to keep the soil and air temperatures below 68° F. Use shading when necessary.
Ventilation
Use a well ventilated greenhouse. Do not permit humidity to build up.
Fertilizer
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks. A well fertilized lily tends to be shorter than an under fertilized plant.
Plant Growth Retardants
Height control is one of the more difficult aspects of pot lily forcing. Forcers need to rely greatly on their past experiences with the various cultivars and then decide whether or not to use ancymidol (A'Rest), Bonzi, Sumagic, or any other approved growth retardant. If soil drenches are to be used, split applications are usually best. Also, the pH of the medium needs to be about 7.0 to get the most effective response of the soil drenches, particularly for A'Rest. The first to be applied at shoot emergence, the second 10-14 days later. Foliar sprays can also be used. In addition there has been research conducted on preplant bulb dips. If EPA approved, forcers should experiment with the procedure to determine the best rate and length of the bulb dip to use for their forcing conditions and cultivars used.
Marketing and Storage
Forcers - plants should be marketed as soon as first flower begins to color. This insures that the consumer will receive maximum enjoyment. Care must be taken not to damage the unopened buds during marketing. Storage should be kept to a minimum. If they must be stored, place them at 35-40°F when the first flower is fully colored, but not open.
According to Cornell University trials a 50 ppm application of facination 2 days before storage will prevent leaves from yellowing.
More DetailsAsiatic and Oriental hybrid lily bulbs used for cut flower forcing can be forced on a year-round basis by using a combination of precooled and frozen-in bulbs. The number of cultivars available is constantly changing. Generally, the asiatics force in 8-10 weeks. Oriental and auratum lilies force in 12-15 weeks and are available until June 30th.
On Arrival
After being programmed, forcers should be prepared to plant bulbs immediately on arrival. If they must be stored, place them at 32-35 ° F. Storage at higher temperatures will cause desiccation of the bulbs which will result in fewer flowers per stem. Forcers should always check to be certain the bulbs are not seriously damaged or diseased. Do not store for longer than 10 days. DO NOT REFREEZE.
Planting and Spacing
The planting medium should be sterile, well drained and have a pH of 5.5 to 7.5 with pH 7.0 being preferred. Because some lilies can develop leaf scorch due to soil borne fluoride, the medium should not contain superphosphate or perlite. If ground beds or raised benches are used, be certain to sterilize them and be sure they are low in soluble salts. Leaching may be necessary. They must be well drained. Bulbs for cut flowers can be planted in ground beds, 8-10" deep raised beds or standard pots. Plant bulbs with at least 2" of planting medium above the bulb nose. This is necessary to develop stem roots.
Suggested Number of bulbs for Cut Flower Forcing in Beds or Raised Benches:
Asiatic Hybrids
12/14 cm 6-9 per sq ft
14/16 cm 5-8 per sq ft
Oriental Hybrids
16/18 cm 4-6 per sq ft
18/20 cm 4-5 per sq ft
Support System:
Because of their length and variation in stem strength, some cut lily cultivars may need wire support systems. If used, be certain the netting has holes large enough to accommodate easy cutting and removal of the flowers. Also, place the netting over the bulbs directly after planting.
Watering:
Water the planting medium thoroughly after planting and then keep the medium moist but not wet.
Light:
Lilies require a medium to high Light (>2500 ft candle) intensity greenhouse, especially during the short days of winter. If shading was used during the summer, be certain to clean the glass thoroughly before winter. In most instances lilies respond to HID lighting during the winter months. This aids in reducing flower abortion and abscission especially with sensitive cultivars. Forcers who have low light intensity winters should seriously consider installing an HID lighting system for forcing cut lilies. When very high light condition occur (spring/summer), screening or shading is advised. Extremely high light intensities can reduce the length of the cut flower.
Use 55-63° F (13-17° C) night temperatures and not higher than 70° F (21° C) day temperatures. Avoid great fluctuations in temperature, because this can help to promote leaf scorch. Also, whenever possible, start Orientals at 59° F (15° C) for about 4 weeks. Later, Orientals can be forced at higher temperatures (63-65° F/17-18° C) than Asiatics. In general, Asiatic and longiflorum lilies take 30-35 days to flower after they reach the visible bud stage of development and Orientals take 50-55 days. Lastly, when seasonally warm temperatures occur, try to keep the soil and air temperatures below 68° F (20° C). Mulching of ground or raised bed and shading are advised. Ground or raised bed and shading are advised. Use a well ventilated greenhouse. Do not permit humidity to build up.
The bulbs themselves contain lots of stored food, and they should be able to support the plant until the shoot emerges. Recommendations suggest withholding fertilizer until the shoot is 4-6" tall. Some growers incorporate a 10-6-4 slow release fertilizer in the medium prior to planting. Suggested rate is eight pounds per cubic yard. Use a liquid fertilizer such as 16-4-12 at the rate of 200 ppm to help deepen foliage color. If a preplant fertilizer has been added to the soil, then just use the liquid fertilizer every two weeks.
Growing in the Summertime:
It is very important that the stem roots are developed before exposing the lilies to warm summer temperatures. Keep the planted bulbs for 3-4 weeks at or below 65°F to allow the roots to grow. This can be done in a bulb cooler or cool basement. Bulbs that have a poor root system will flower unevenly and have a lot of bloom dropping.
Marketing, Harvesting and Storage:
Forcers - as soon as the first flower has fully developed color, but is not open, the plants should be cut. Care must be taken not to damage the unopened buds during marketing. Whenever possible, lilies should not be stored.
More DetailsLocation
Vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted vine produces new growth this should be carefully trained and tied into position.
More DetailsPlanting:
In the spring, after the last frost, plant bulbs twice as deep at their height, or around 2 inches, and spaced about 6 inches apart. Water well when finished planting.
Soil:
Prefers well-drained, organically rich soil with consistent moisture.
Sun:
Prefers full sun, especially hot afternoon sun.
More Details
How To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More Details