Canna
We carry 243 plants that match your search request. We've included all matches below. Click on any plant to learn additional details.
Planting:
In the spring, after the last frost, plant bulbs twice as deep at their height, or around 2 inches, and spaced about 6 inches apart. Water well when finished planting.
Soil:
Prefers well-drained, organically rich soil with consistent moisture.
Sun:
Prefers full sun, especially hot afternoon sun.
More Details
Planting:
In the spring, after the last frost, plant bulbs twice as deep at their height, or around 2 inches, and spaced about 6 inches apart. Water well when finished planting.
Soil:
Prefers well-drained, organically rich soil with consistent moisture.
Sun:
Prefers full sun, especially hot afternoon sun.
More Details
Planting:
In the spring, after the last frost, plant bulbs twice as deep at their height, or around 2 inches, and spaced about 6 inches apart. Water well when finished planting.
Soil:
Prefers well-drained, organically rich soil with consistent moisture.
Sun:
Prefers full sun, especially hot afternoon sun.
More Details
densely clustered flat flower buds start as pale pink, maturing to rosy red
More Detailsdense purple/green foliage, tinged w/red, rose-red flowers, groundcover
More DetailsCalla For 3 Gallon Pot (6" or 1 gallon pot instructions below)
Planting
Aethiopica are moisture loving. Use a well draining media with a pH of 5.5-6.5 that is high in organic matter. Plant 2" deep in containers or 3-4" deep in beds.
Light
Aethiopica will withstand a wide range of light conditions (500 to 5,000 candles). Higher light can be tolerated in cool and humid periods.
Plants can handle full sun to 70% shade without becoming too badly stressed, but 50% shade is ideal. Deeply shaded conditions will cause lengthened, but weakened stems
Temperature
Aethiopica tolerate a range of temperatures but prefers relatively cool temperatures. Optimum daytime temperatures are 55-65⁰F; nighttime 45-55⁰F; germination at 65-70⁰F until sprouting helps hasten rooting and establishment. Cool nights with clear days will promote shorter, stronger stems. Aethiopica are somewhat frost sensitive. Foliage will not withstand prolonged freezing temperatures. Bulbs can take some frost but not soil freeze to bulb depth.
Watering
Keep soil slightly moist until substantial sprouts emerge. Then keep soil slightly moist (but not soggy) until peak bloom then decrease moderately.
Fertilization
Proper fertility is critical for full plant growth with well-colored leaves and continued flower production in Aethiopica. Use a soil incorporated 30-day release preplant charge of nitrogen and potassium (containing little or no phosphorous). This will produce good early establishment of roots and improved early vigor. At approximately 3-4 weeks, begin a semi-balanced liquid feed @ 200 ppm weekly or 100 ppm constant using 20-10-20 or initially as needed. Modifications can then be made based on individual growth objectives and conditions. At leaf unfurling, reducing to 50 ppm alternated 1:1 with clear water will keep plants from getting too leafy. Alternately, consider the use of a low phosphorous fertilizer (i.e. 17-5-17) can result in better plant balance.
Height Control
Generally it is best to make a single PGR drench application when plants are at 1/2 to 3/4 desired plant height. Note that the require rate will depend primarily on the light, temperature, fertility and your bulb size & form. It’s often best to use apply Bonzi at 7.5-10 ppm @ 0.25-0.33oz/gal (2-2.6ml/L). 3.75-7.5 ppm @ 0.125-0.25oz/gal (1-2ml/L) should be used if: 1) lighter desired effects are desired; 2) earlier or multiple applications will be use; 3) smaller and/or clustered bulbs are being used. TOO HIGH A RATE OR TOO EARLY AN APPLICATION CAN CAUSE LEAF CRINKLING, PLANT ROSETTING, LACK OF BLOOM OR GENERAL STUNTING. If plants become over growth regulated, a GA rescue spray can be effective @100-200ppm GA3 or GA4+7 [and coupled with a mild surfactant]. *Bonzi rates higher than 10 ppm may arrest plant height completely.
Disease Prevention & Control
Aethiopica is generally susceptible to three (3) primary soil borne pathogens: Pythium & Phytophthora (“water molds”) plus Rhizoctonia and bacteria: Erwinia (Pectobacteria spp.). “Water molds” are often the first & most critical component in the disease complex, followed by Rhizoctonia. with the following preferred materials:
Once root injury occurs, Erwinia will often enter as a seconday infection. Our best tank mixed, four-part chemical drench targets the “3-pathogen complex”
1) WATER MOLD part 1- Subdue Maxx (mefenoxam 25.1% ai) @ 0.5-1oz/100 gal (4-8ml/100 L)
2) WATER MOLD part 2- Aliette (fosetyl-aluminum 80% ai) @ 13oz/100 gal (98gm/100 L)
3) RHIZOCTONIA- Heritage (azoxystrobin 50% ai) @ 4oz/100 gal (30gm/100 L)
4) ERWINIA- Agrimycin-17 (streptomycin sulfate 21.2% ai) @ 8-16oz/100 gal (60-120gm/100 L)
Pesticide drench timing is critical. Drench within the first 2-3 days of initial watering . Timing of the second drench should be made at 14 to 21 days. A third drench may be necessary 3-6 weeks after the second one (5-9 weeks from planting). *Always drench in the mornings or early enough for all foliage/runoff to dry thoroughly. Watch for leaf spot as leaves unfurl. Once leaf spot is observed, spray foliage to runoff with a selection of the following:
1) BACTERIAL LEAF SPOT part 1- Champ II (copper hydroxide 37.5%) @ 32-64oz/100 gal (240- 479ml/100 L
2) BACTERIAL LEAF SPOT part 2- Dithane (mancozeb 75%) @ 32oz/100 gal (24 ml/100 L)
3) FUNGAL LEAF SPOT option 1- Daconil Weather Stik (chlorothalonil @ 54%) @ 22oz/100 gal (165ml/100 L) option 2- Chipco 26019 26GT (iprodione @ 23.3%) @ 32oz/100 gal (240 ml/100 L) *DO NOT COMBINE FOLIAR COPPERS WITH ALIETTE OR OTHER ACIDIFYING PRODUCTS.
Inspect Crop Weekly. Routinely scout for cleared or browning roots, leaf spots, etc. • ALWAYS WATCH FOR ERWINIA INFECTED PLANTS TO CAREFULLYROGUE & DISCARD. Re-drench per recommendations if root problems are discovered, up to a total of three times over the life cycle. Sanitation is critical, especially in multiple cropping programs where rot can progress without an obvious cause. Sanitize benches, floors, conveyors, pots, soil mixers, etc. between crops.
Insects
Control Fungus Gnats and Shoreflies due to their ability to spread bacteria and other diseases. Control white flies, aphids and thrips on an as-needed basis.If aphid or thrips are present, use aggressive control measures since they are capable of rapidly spreading various viruses. Watch for early leaf chewing evidence from larvae after sprouting. Most materials can safely be applied at label rates; beware of chemical incompatibilities described on label(s).
Calla for 6" or 1 gallon pots
Storage After Arrival
Unpack on arrival. Dispose of any soft rot and wash hands to avoid spreading the bacterial to healthy bulbs. Place in well ventilated trays at 65° F for a couple of days prior to planting. This will insure any possible friction wounds caused by transit are well callused before planting. For long-term storage (6 weeks or more) keep well ventilated at 45° F and a relative humidity of 80%.
Potting Medium
Plant with 1 to 1 1/2" of medium over the tuber, rounded side down, sprouts (eyes) up. Pot sizes below 4 1/2" standard are more difficult to grow due to root volume restrictions (especially in clay pots). Suggested planting guide is one bulb per 4 1/2" pot and 2 bulbs per 6 1/4" pot. Additional care and management of fertility and irrigation are required in small or shallow pots because plants tend to be weaker, more easily stressed and, therefore more disease prone. The medium should be well drained, a pH of 6 - 6.5 and have good air porosity (optimal at 20% +/- 5%).
Watering
Water management is critical. Keep pots moist but avoid excessively wet and excessively dry conditions. The first (within 2 days of planting) thorough watering should be a three-part preventative chemical drench. Then water sparingly until leaves unfurl. In week 3 or 4 reinoculate with a drench of Trichoderma and then a week later do a second chemical drench. Schedule these drenches to coincide with required watering to avoid overly wet pots.
Light
Calla can be exposed to full sunlight, unless the temperature in the greenhouse goes over 80° F, then some shading is recommended to avoid leafburn.
Fertilizer
Early fertility levels in calla, at the time of planting and extending two weeks, enhances overall long-term plant fullness and uniformity of vigor. A 10-20 day media incorporated pre-charge of nitrogen and potassium (no phosphorous in early pots) would be ideal.
Marketing
Market your pots with slightly less than one half the total number of expected blooms showing color or in spike. Ship long distances under refrigerated conditions (approximately 40° F or 5° C) to avoid excessive stretching. Retail under cool and bright conditions.
More DetailsCalla For 3 Gallon Pot (6" or 1 gallon pot instructions below)
Planting
Aethiopica are moisture loving. Use a well draining media with a pH of 5.5-6.5 that is high in organic matter. Plant 2" deep in containers or 3-4" deep in beds.
Light
Aethiopica will withstand a wide range of light conditions (500 to 5,000 candles). Higher light can be tolerated in cool and humid periods.
Plants can handle full sun to 70% shade without becoming too badly stressed, but 50% shade is ideal. Deeply shaded conditions will cause lengthened, but weakened stems
Temperature
Aethiopica tolerate a range of temperatures but prefers relatively cool temperatures. Optimum daytime temperatures are 55-65⁰F; nighttime 45-55⁰F; germination at 65-70⁰F until sprouting helps hasten rooting and establishment. Cool nights with clear days will promote shorter, stronger stems. Aethiopica are somewhat frost sensitive. Foliage will not withstand prolonged freezing temperatures. Bulbs can take some frost but not soil freeze to bulb depth.
Watering
Keep soil slightly moist until substantial sprouts emerge. Then keep soil slightly moist (but not soggy) until peak bloom then decrease moderately.
Fertilization
Proper fertility is critical for full plant growth with well-colored leaves and continued flower production in Aethiopica. Use a soil incorporated 30-day release preplant charge of nitrogen and potassium (containing little or no phosphorous). This will produce good early establishment of roots and improved early vigor. At approximately 3-4 weeks, begin a semi-balanced liquid feed @ 200 ppm weekly or 100 ppm constant using 20-10-20 or initially as needed. Modifications can then be made based on individual growth objectives and conditions. At leaf unfurling, reducing to 50 ppm alternated 1:1 with clear water will keep plants from getting too leafy. Alternately, consider the use of a low phosphorous fertilizer (i.e. 17-5-17) can result in better plant balance.
Height Control
Generally it is best to make a single PGR drench application when plants are at 1/2 to 3/4 desired plant height. Note that the require rate will depend primarily on the light, temperature, fertility and your bulb size & form. It’s often best to use apply Bonzi at 7.5-10 ppm @ 0.25-0.33oz/gal (2-2.6ml/L). 3.75-7.5 ppm @ 0.125-0.25oz/gal (1-2ml/L) should be used if: 1) lighter desired effects are desired; 2) earlier or multiple applications will be use; 3) smaller and/or clustered bulbs are being used. TOO HIGH A RATE OR TOO EARLY AN APPLICATION CAN CAUSE LEAF CRINKLING, PLANT ROSETTING, LACK OF BLOOM OR GENERAL STUNTING. If plants become over growth regulated, a GA rescue spray can be effective @100-200ppm GA3 or GA4+7 [and coupled with a mild surfactant]. *Bonzi rates higher than 10 ppm may arrest plant height completely.
Disease Prevention & Control
Aethiopica is generally susceptible to three (3) primary soil borne pathogens: Pythium & Phytophthora (“water molds”) plus Rhizoctonia and bacteria: Erwinia (Pectobacteria spp.). “Water molds” are often the first & most critical component in the disease complex, followed by Rhizoctonia. with the following preferred materials:
Once root injury occurs, Erwinia will often enter as a seconday infection. Our best tank mixed, four-part chemical drench targets the “3-pathogen complex”
1) WATER MOLD part 1- Subdue Maxx (mefenoxam 25.1% ai) @ 0.5-1oz/100 gal (4-8ml/100 L)
2) WATER MOLD part 2- Aliette (fosetyl-aluminum 80% ai) @ 13oz/100 gal (98gm/100 L)
3) RHIZOCTONIA- Heritage (azoxystrobin 50% ai) @ 4oz/100 gal (30gm/100 L)
4) ERWINIA- Agrimycin-17 (streptomycin sulfate 21.2% ai) @ 8-16oz/100 gal (60-120gm/100 L)
Pesticide drench timing is critical. Drench within the first 2-3 days of initial watering . Timing of the second drench should be made at 14 to 21 days. A third drench may be necessary 3-6 weeks after the second one (5-9 weeks from planting). *Always drench in the mornings or early enough for all foliage/runoff to dry thoroughly. Watch for leaf spot as leaves unfurl. Once leaf spot is observed, spray foliage to runoff with a selection of the following:
1) BACTERIAL LEAF SPOT part 1- Champ II (copper hydroxide 37.5%) @ 32-64oz/100 gal (240- 479ml/100 L
2) BACTERIAL LEAF SPOT part 2- Dithane (mancozeb 75%) @ 32oz/100 gal (24 ml/100 L)
3) FUNGAL LEAF SPOT option 1- Daconil Weather Stik (chlorothalonil @ 54%) @ 22oz/100 gal (165ml/100 L) option 2- Chipco 26019 26GT (iprodione @ 23.3%) @ 32oz/100 gal (240 ml/100 L) *DO NOT COMBINE FOLIAR COPPERS WITH ALIETTE OR OTHER ACIDIFYING PRODUCTS.
Inspect Crop Weekly. Routinely scout for cleared or browning roots, leaf spots, etc. • ALWAYS WATCH FOR ERWINIA INFECTED PLANTS TO CAREFULLYROGUE & DISCARD. Re-drench per recommendations if root problems are discovered, up to a total of three times over the life cycle. Sanitation is critical, especially in multiple cropping programs where rot can progress without an obvious cause. Sanitize benches, floors, conveyors, pots, soil mixers, etc. between crops.
Insects
Control Fungus Gnats and Shoreflies due to their ability to spread bacteria and other diseases. Control white flies, aphids and thrips on an as-needed basis.If aphid or thrips are present, use aggressive control measures since they are capable of rapidly spreading various viruses. Watch for early leaf chewing evidence from larvae after sprouting. Most materials can safely be applied at label rates; beware of chemical incompatibilities described on label(s).
Calla for 6" or 1 gallon pots
Storage After Arrival
Unpack on arrival. Dispose of any soft rot and wash hands to avoid spreading the bacterial to healthy bulbs. Place in well ventilated trays at 65° F for a couple of days prior to planting. This will insure any possible friction wounds caused by transit are well callused before planting. For long-term storage (6 weeks or more) keep well ventilated at 45° F and a relative humidity of 80%.
Potting Medium
Plant with 1 to 1 1/2" of medium over the tuber, rounded side down, sprouts (eyes) up. Pot sizes below 4 1/2" standard are more difficult to grow due to root volume restrictions (especially in clay pots). Suggested planting guide is one bulb per 4 1/2" pot and 2 bulbs per 6 1/4" pot. Additional care and management of fertility and irrigation are required in small or shallow pots because plants tend to be weaker, more easily stressed and, therefore more disease prone. The medium should be well drained, a pH of 6 - 6.5 and have good air porosity (optimal at 20% +/- 5%).
Watering
Water management is critical. Keep pots moist but avoid excessively wet and excessively dry conditions. The first (within 2 days of planting) thorough watering should be a three-part preventative chemical drench. Then water sparingly until leaves unfurl. In week 3 or 4 reinoculate with a drench of Trichoderma and then a week later do a second chemical drench. Schedule these drenches to coincide with required watering to avoid overly wet pots.
Light
Calla can be exposed to full sunlight, unless the temperature in the greenhouse goes over 80° F, then some shading is recommended to avoid leafburn.
Fertilizer
Early fertility levels in calla, at the time of planting and extending two weeks, enhances overall long-term plant fullness and uniformity of vigor. A 10-20 day media incorporated pre-charge of nitrogen and potassium (no phosphorous in early pots) would be ideal.
Marketing
Market your pots with slightly less than one half the total number of expected blooms showing color or in spike. Ship long distances under refrigerated conditions (approximately 40° F or 5° C) to avoid excessive stretching. Retail under cool and bright conditions.
More DetailsCalla For 3 Gallon Pot (6" or 1 gallon pot instructions below)
Planting
Aethiopica are moisture loving. Use a well draining media with a pH of 5.5-6.5 that is high in organic matter. Plant 2" deep in containers or 3-4" deep in beds.
Light
Aethiopica will withstand a wide range of light conditions (500 to 5,000 candles). Higher light can be tolerated in cool and humid periods.
Plants can handle full sun to 70% shade without becoming too badly stressed, but 50% shade is ideal. Deeply shaded conditions will cause lengthened, but weakened stems
Temperature
Aethiopica tolerate a range of temperatures but prefers relatively cool temperatures. Optimum daytime temperatures are 55-65⁰F; nighttime 45-55⁰F; germination at 65-70⁰F until sprouting helps hasten rooting and establishment. Cool nights with clear days will promote shorter, stronger stems. Aethiopica are somewhat frost sensitive. Foliage will not withstand prolonged freezing temperatures. Bulbs can take some frost but not soil freeze to bulb depth.
Watering
Keep soil slightly moist until substantial sprouts emerge. Then keep soil slightly moist (but not soggy) until peak bloom then decrease moderately.
Fertilization
Proper fertility is critical for full plant growth with well-colored leaves and continued flower production in Aethiopica. Use a soil incorporated 30-day release preplant charge of nitrogen and potassium (containing little or no phosphorous). This will produce good early establishment of roots and improved early vigor. At approximately 3-4 weeks, begin a semi-balanced liquid feed @ 200 ppm weekly or 100 ppm constant using 20-10-20 or initially as needed. Modifications can then be made based on individual growth objectives and conditions. At leaf unfurling, reducing to 50 ppm alternated 1:1 with clear water will keep plants from getting too leafy. Alternately, consider the use of a low phosphorous fertilizer (i.e. 17-5-17) can result in better plant balance.
Height Control
Generally it is best to make a single PGR drench application when plants are at 1/2 to 3/4 desired plant height. Note that the require rate will depend primarily on the light, temperature, fertility and your bulb size & form. It’s often best to use apply Bonzi at 7.5-10 ppm @ 0.25-0.33oz/gal (2-2.6ml/L). 3.75-7.5 ppm @ 0.125-0.25oz/gal (1-2ml/L) should be used if: 1) lighter desired effects are desired; 2) earlier or multiple applications will be use; 3) smaller and/or clustered bulbs are being used. TOO HIGH A RATE OR TOO EARLY AN APPLICATION CAN CAUSE LEAF CRINKLING, PLANT ROSETTING, LACK OF BLOOM OR GENERAL STUNTING. If plants become over growth regulated, a GA rescue spray can be effective @100-200ppm GA3 or GA4+7 [and coupled with a mild surfactant]. *Bonzi rates higher than 10 ppm may arrest plant height completely.
Disease Prevention & Control
Aethiopica is generally susceptible to three (3) primary soil borne pathogens: Pythium & Phytophthora (“water molds”) plus Rhizoctonia and bacteria: Erwinia (Pectobacteria spp.). “Water molds” are often the first & most critical component in the disease complex, followed by Rhizoctonia. with the following preferred materials:
Once root injury occurs, Erwinia will often enter as a seconday infection. Our best tank mixed, four-part chemical drench targets the “3-pathogen complex”
1) WATER MOLD part 1- Subdue Maxx (mefenoxam 25.1% ai) @ 0.5-1oz/100 gal (4-8ml/100 L)
2) WATER MOLD part 2- Aliette (fosetyl-aluminum 80% ai) @ 13oz/100 gal (98gm/100 L)
3) RHIZOCTONIA- Heritage (azoxystrobin 50% ai) @ 4oz/100 gal (30gm/100 L)
4) ERWINIA- Agrimycin-17 (streptomycin sulfate 21.2% ai) @ 8-16oz/100 gal (60-120gm/100 L)
Pesticide drench timing is critical. Drench within the first 2-3 days of initial watering . Timing of the second drench should be made at 14 to 21 days. A third drench may be necessary 3-6 weeks after the second one (5-9 weeks from planting). *Always drench in the mornings or early enough for all foliage/runoff to dry thoroughly. Watch for leaf spot as leaves unfurl. Once leaf spot is observed, spray foliage to runoff with a selection of the following:
1) BACTERIAL LEAF SPOT part 1- Champ II (copper hydroxide 37.5%) @ 32-64oz/100 gal (240- 479ml/100 L
2) BACTERIAL LEAF SPOT part 2- Dithane (mancozeb 75%) @ 32oz/100 gal (24 ml/100 L)
3) FUNGAL LEAF SPOT option 1- Daconil Weather Stik (chlorothalonil @ 54%) @ 22oz/100 gal (165ml/100 L) option 2- Chipco 26019 26GT (iprodione @ 23.3%) @ 32oz/100 gal (240 ml/100 L) *DO NOT COMBINE FOLIAR COPPERS WITH ALIETTE OR OTHER ACIDIFYING PRODUCTS.
Inspect Crop Weekly. Routinely scout for cleared or browning roots, leaf spots, etc. • ALWAYS WATCH FOR ERWINIA INFECTED PLANTS TO CAREFULLYROGUE & DISCARD. Re-drench per recommendations if root problems are discovered, up to a total of three times over the life cycle. Sanitation is critical, especially in multiple cropping programs where rot can progress without an obvious cause. Sanitize benches, floors, conveyors, pots, soil mixers, etc. between crops.
Insects
Control Fungus Gnats and Shoreflies due to their ability to spread bacteria and other diseases. Control white flies, aphids and thrips on an as-needed basis.If aphid or thrips are present, use aggressive control measures since they are capable of rapidly spreading various viruses. Watch for early leaf chewing evidence from larvae after sprouting. Most materials can safely be applied at label rates; beware of chemical incompatibilities described on label(s).
Calla for 6" or 1 gallon pots
Storage After Arrival
Unpack on arrival. Dispose of any soft rot and wash hands to avoid spreading the bacterial to healthy bulbs. Place in well ventilated trays at 65° F for a couple of days prior to planting. This will insure any possible friction wounds caused by transit are well callused before planting. For long-term storage (6 weeks or more) keep well ventilated at 45° F and a relative humidity of 80%.
Potting Medium
Plant with 1 to 1 1/2" of medium over the tuber, rounded side down, sprouts (eyes) up. Pot sizes below 4 1/2" standard are more difficult to grow due to root volume restrictions (especially in clay pots). Suggested planting guide is one bulb per 4 1/2" pot and 2 bulbs per 6 1/4" pot. Additional care and management of fertility and irrigation are required in small or shallow pots because plants tend to be weaker, more easily stressed and, therefore more disease prone. The medium should be well drained, a pH of 6 - 6.5 and have good air porosity (optimal at 20% +/- 5%).
Watering
Water management is critical. Keep pots moist but avoid excessively wet and excessively dry conditions. The first (within 2 days of planting) thorough watering should be a three-part preventative chemical drench. Then water sparingly until leaves unfurl. In week 3 or 4 reinoculate with a drench of Trichoderma and then a week later do a second chemical drench. Schedule these drenches to coincide with required watering to avoid overly wet pots.
Light
Calla can be exposed to full sunlight, unless the temperature in the greenhouse goes over 80° F, then some shading is recommended to avoid leafburn.
Fertilizer
Early fertility levels in calla, at the time of planting and extending two weeks, enhances overall long-term plant fullness and uniformity of vigor. A 10-20 day media incorporated pre-charge of nitrogen and potassium (no phosphorous in early pots) would be ideal.
Marketing
Market your pots with slightly less than one half the total number of expected blooms showing color or in spike. Ship long distances under refrigerated conditions (approximately 40° F or 5° C) to avoid excessive stretching. Retail under cool and bright conditions.
More DetailsCalla For 3 Gallon Pot (6" or 1 gallon pot instructions below)
Planting
Aethiopica are moisture loving. Use a well draining media with a pH of 5.5-6.5 that is high in organic matter. Plant 2" deep in containers or 3-4" deep in beds.
Light
Aethiopica will withstand a wide range of light conditions (500 to 5,000 candles). Higher light can be tolerated in cool and humid periods.
Plants can handle full sun to 70% shade without becoming too badly stressed, but 50% shade is ideal. Deeply shaded conditions will cause lengthened, but weakened stems
Temperature
Aethiopica tolerate a range of temperatures but prefers relatively cool temperatures. Optimum daytime temperatures are 55-65⁰F; nighttime 45-55⁰F; germination at 65-70⁰F until sprouting helps hasten rooting and establishment. Cool nights with clear days will promote shorter, stronger stems. Aethiopica are somewhat frost sensitive. Foliage will not withstand prolonged freezing temperatures. Bulbs can take some frost but not soil freeze to bulb depth.
Watering
Keep soil slightly moist until substantial sprouts emerge. Then keep soil slightly moist (but not soggy) until peak bloom then decrease moderately.
Fertilization
Proper fertility is critical for full plant growth with well-colored leaves and continued flower production in Aethiopica. Use a soil incorporated 30-day release preplant charge of nitrogen and potassium (containing little or no phosphorous). This will produce good early establishment of roots and improved early vigor. At approximately 3-4 weeks, begin a semi-balanced liquid feed @ 200 ppm weekly or 100 ppm constant using 20-10-20 or initially as needed. Modifications can then be made based on individual growth objectives and conditions. At leaf unfurling, reducing to 50 ppm alternated 1:1 with clear water will keep plants from getting too leafy. Alternately, consider the use of a low phosphorous fertilizer (i.e. 17-5-17) can result in better plant balance.
Height Control
Generally it is best to make a single PGR drench application when plants are at 1/2 to 3/4 desired plant height. Note that the require rate will depend primarily on the light, temperature, fertility and your bulb size & form. It’s often best to use apply Bonzi at 7.5-10 ppm @ 0.25-0.33oz/gal (2-2.6ml/L). 3.75-7.5 ppm @ 0.125-0.25oz/gal (1-2ml/L) should be used if: 1) lighter desired effects are desired; 2) earlier or multiple applications will be use; 3) smaller and/or clustered bulbs are being used. TOO HIGH A RATE OR TOO EARLY AN APPLICATION CAN CAUSE LEAF CRINKLING, PLANT ROSETTING, LACK OF BLOOM OR GENERAL STUNTING. If plants become over growth regulated, a GA rescue spray can be effective @100-200ppm GA3 or GA4+7 [and coupled with a mild surfactant]. *Bonzi rates higher than 10 ppm may arrest plant height completely.
Disease Prevention & Control
Aethiopica is generally susceptible to three (3) primary soil borne pathogens: Pythium & Phytophthora (“water molds”) plus Rhizoctonia and bacteria: Erwinia (Pectobacteria spp.). “Water molds” are often the first & most critical component in the disease complex, followed by Rhizoctonia. with the following preferred materials:
Once root injury occurs, Erwinia will often enter as a seconday infection. Our best tank mixed, four-part chemical drench targets the “3-pathogen complex”
1) WATER MOLD part 1- Subdue Maxx (mefenoxam 25.1% ai) @ 0.5-1oz/100 gal (4-8ml/100 L)
2) WATER MOLD part 2- Aliette (fosetyl-aluminum 80% ai) @ 13oz/100 gal (98gm/100 L)
3) RHIZOCTONIA- Heritage (azoxystrobin 50% ai) @ 4oz/100 gal (30gm/100 L)
4) ERWINIA- Agrimycin-17 (streptomycin sulfate 21.2% ai) @ 8-16oz/100 gal (60-120gm/100 L)
Pesticide drench timing is critical. Drench within the first 2-3 days of initial watering . Timing of the second drench should be made at 14 to 21 days. A third drench may be necessary 3-6 weeks after the second one (5-9 weeks from planting). *Always drench in the mornings or early enough for all foliage/runoff to dry thoroughly. Watch for leaf spot as leaves unfurl. Once leaf spot is observed, spray foliage to runoff with a selection of the following:
1) BACTERIAL LEAF SPOT part 1- Champ II (copper hydroxide 37.5%) @ 32-64oz/100 gal (240- 479ml/100 L
2) BACTERIAL LEAF SPOT part 2- Dithane (mancozeb 75%) @ 32oz/100 gal (24 ml/100 L)
3) FUNGAL LEAF SPOT option 1- Daconil Weather Stik (chlorothalonil @ 54%) @ 22oz/100 gal (165ml/100 L) option 2- Chipco 26019 26GT (iprodione @ 23.3%) @ 32oz/100 gal (240 ml/100 L) *DO NOT COMBINE FOLIAR COPPERS WITH ALIETTE OR OTHER ACIDIFYING PRODUCTS.
Inspect Crop Weekly. Routinely scout for cleared or browning roots, leaf spots, etc. • ALWAYS WATCH FOR ERWINIA INFECTED PLANTS TO CAREFULLYROGUE & DISCARD. Re-drench per recommendations if root problems are discovered, up to a total of three times over the life cycle. Sanitation is critical, especially in multiple cropping programs where rot can progress without an obvious cause. Sanitize benches, floors, conveyors, pots, soil mixers, etc. between crops.
Insects
Control Fungus Gnats and Shoreflies due to their ability to spread bacteria and other diseases. Control white flies, aphids and thrips on an as-needed basis.If aphid or thrips are present, use aggressive control measures since they are capable of rapidly spreading various viruses. Watch for early leaf chewing evidence from larvae after sprouting. Most materials can safely be applied at label rates; beware of chemical incompatibilities described on label(s).
Calla for 6" or 1 gallon pots
Storage After Arrival
Unpack on arrival. Dispose of any soft rot and wash hands to avoid spreading the bacterial to healthy bulbs. Place in well ventilated trays at 65° F for a couple of days prior to planting. This will insure any possible friction wounds caused by transit are well callused before planting. For long-term storage (6 weeks or more) keep well ventilated at 45° F and a relative humidity of 80%.
Potting Medium
Plant with 1 to 1 1/2" of medium over the tuber, rounded side down, sprouts (eyes) up. Pot sizes below 4 1/2" standard are more difficult to grow due to root volume restrictions (especially in clay pots). Suggested planting guide is one bulb per 4 1/2" pot and 2 bulbs per 6 1/4" pot. Additional care and management of fertility and irrigation are required in small or shallow pots because plants tend to be weaker, more easily stressed and, therefore more disease prone. The medium should be well drained, a pH of 6 - 6.5 and have good air porosity (optimal at 20% +/- 5%).
Watering
Water management is critical. Keep pots moist but avoid excessively wet and excessively dry conditions. The first (within 2 days of planting) thorough watering should be a three-part preventative chemical drench. Then water sparingly until leaves unfurl. In week 3 or 4 reinoculate with a drench of Trichoderma and then a week later do a second chemical drench. Schedule these drenches to coincide with required watering to avoid overly wet pots.
Light
Calla can be exposed to full sunlight, unless the temperature in the greenhouse goes over 80° F, then some shading is recommended to avoid leafburn.
Fertilizer
Early fertility levels in calla, at the time of planting and extending two weeks, enhances overall long-term plant fullness and uniformity of vigor. A 10-20 day media incorporated pre-charge of nitrogen and potassium (no phosphorous in early pots) would be ideal.
Marketing
Market your pots with slightly less than one half the total number of expected blooms showing color or in spike. Ship long distances under refrigerated conditions (approximately 40° F or 5° C) to avoid excessive stretching. Retail under cool and bright conditions.
More DetailsCalla For 3 Gallon Pot (6" or 1 gallon pot instructions below)
Planting
Aethiopica are moisture loving. Use a well draining media with a pH of 5.5-6.5 that is high in organic matter. Plant 2" deep in containers or 3-4" deep in beds.
Light
Aethiopica will withstand a wide range of light conditions (500 to 5,000 candles). Higher light can be tolerated in cool and humid periods.
Plants can handle full sun to 70% shade without becoming too badly stressed, but 50% shade is ideal. Deeply shaded conditions will cause lengthened, but weakened stems
Temperature
Aethiopica tolerate a range of temperatures but prefers relatively cool temperatures. Optimum daytime temperatures are 55-65⁰F; nighttime 45-55⁰F; germination at 65-70⁰F until sprouting helps hasten rooting and establishment. Cool nights with clear days will promote shorter, stronger stems. Aethiopica are somewhat frost sensitive. Foliage will not withstand prolonged freezing temperatures. Bulbs can take some frost but not soil freeze to bulb depth.
Watering
Keep soil slightly moist until substantial sprouts emerge. Then keep soil slightly moist (but not soggy) until peak bloom then decrease moderately.
Fertilization
Proper fertility is critical for full plant growth with well-colored leaves and continued flower production in Aethiopica. Use a soil incorporated 30-day release preplant charge of nitrogen and potassium (containing little or no phosphorous). This will produce good early establishment of roots and improved early vigor. At approximately 3-4 weeks, begin a semi-balanced liquid feed @ 200 ppm weekly or 100 ppm constant using 20-10-20 or initially as needed. Modifications can then be made based on individual growth objectives and conditions. At leaf unfurling, reducing to 50 ppm alternated 1:1 with clear water will keep plants from getting too leafy. Alternately, consider the use of a low phosphorous fertilizer (i.e. 17-5-17) can result in better plant balance.
Height Control
Generally it is best to make a single PGR drench application when plants are at 1/2 to 3/4 desired plant height. Note that the require rate will depend primarily on the light, temperature, fertility and your bulb size & form. It’s often best to use apply Bonzi at 7.5-10 ppm @ 0.25-0.33oz/gal (2-2.6ml/L). 3.75-7.5 ppm @ 0.125-0.25oz/gal (1-2ml/L) should be used if: 1) lighter desired effects are desired; 2) earlier or multiple applications will be use; 3) smaller and/or clustered bulbs are being used. TOO HIGH A RATE OR TOO EARLY AN APPLICATION CAN CAUSE LEAF CRINKLING, PLANT ROSETTING, LACK OF BLOOM OR GENERAL STUNTING. If plants become over growth regulated, a GA rescue spray can be effective @100-200ppm GA3 or GA4+7 [and coupled with a mild surfactant]. *Bonzi rates higher than 10 ppm may arrest plant height completely.
Disease Prevention & Control
Aethiopica is generally susceptible to three (3) primary soil borne pathogens: Pythium & Phytophthora (“water molds”) plus Rhizoctonia and bacteria: Erwinia (Pectobacteria spp.). “Water molds” are often the first & most critical component in the disease complex, followed by Rhizoctonia. with the following preferred materials:
Once root injury occurs, Erwinia will often enter as a seconday infection. Our best tank mixed, four-part chemical drench targets the “3-pathogen complex”
1) WATER MOLD part 1- Subdue Maxx (mefenoxam 25.1% ai) @ 0.5-1oz/100 gal (4-8ml/100 L)
2) WATER MOLD part 2- Aliette (fosetyl-aluminum 80% ai) @ 13oz/100 gal (98gm/100 L)
3) RHIZOCTONIA- Heritage (azoxystrobin 50% ai) @ 4oz/100 gal (30gm/100 L)
4) ERWINIA- Agrimycin-17 (streptomycin sulfate 21.2% ai) @ 8-16oz/100 gal (60-120gm/100 L)
Pesticide drench timing is critical. Drench within the first 2-3 days of initial watering . Timing of the second drench should be made at 14 to 21 days. A third drench may be necessary 3-6 weeks after the second one (5-9 weeks from planting). *Always drench in the mornings or early enough for all foliage/runoff to dry thoroughly. Watch for leaf spot as leaves unfurl. Once leaf spot is observed, spray foliage to runoff with a selection of the following:
1) BACTERIAL LEAF SPOT part 1- Champ II (copper hydroxide 37.5%) @ 32-64oz/100 gal (240- 479ml/100 L
2) BACTERIAL LEAF SPOT part 2- Dithane (mancozeb 75%) @ 32oz/100 gal (24 ml/100 L)
3) FUNGAL LEAF SPOT option 1- Daconil Weather Stik (chlorothalonil @ 54%) @ 22oz/100 gal (165ml/100 L) option 2- Chipco 26019 26GT (iprodione @ 23.3%) @ 32oz/100 gal (240 ml/100 L) *DO NOT COMBINE FOLIAR COPPERS WITH ALIETTE OR OTHER ACIDIFYING PRODUCTS.
Inspect Crop Weekly. Routinely scout for cleared or browning roots, leaf spots, etc. • ALWAYS WATCH FOR ERWINIA INFECTED PLANTS TO CAREFULLYROGUE & DISCARD. Re-drench per recommendations if root problems are discovered, up to a total of three times over the life cycle. Sanitation is critical, especially in multiple cropping programs where rot can progress without an obvious cause. Sanitize benches, floors, conveyors, pots, soil mixers, etc. between crops.
Insects
Control Fungus Gnats and Shoreflies due to their ability to spread bacteria and other diseases. Control white flies, aphids and thrips on an as-needed basis.If aphid or thrips are present, use aggressive control measures since they are capable of rapidly spreading various viruses. Watch for early leaf chewing evidence from larvae after sprouting. Most materials can safely be applied at label rates; beware of chemical incompatibilities described on label(s).
Calla for 6" or 1 gallon pots
Storage After Arrival
Unpack on arrival. Dispose of any soft rot and wash hands to avoid spreading the bacterial to healthy bulbs. Place in well ventilated trays at 65° F for a couple of days prior to planting. This will insure any possible friction wounds caused by transit are well callused before planting. For long-term storage (6 weeks or more) keep well ventilated at 45° F and a relative humidity of 80%.
Potting Medium
Plant with 1 to 1 1/2" of medium over the tuber, rounded side down, sprouts (eyes) up. Pot sizes below 4 1/2" standard are more difficult to grow due to root volume restrictions (especially in clay pots). Suggested planting guide is one bulb per 4 1/2" pot and 2 bulbs per 6 1/4" pot. Additional care and management of fertility and irrigation are required in small or shallow pots because plants tend to be weaker, more easily stressed and, therefore more disease prone. The medium should be well drained, a pH of 6 - 6.5 and have good air porosity (optimal at 20% +/- 5%).
Watering
Water management is critical. Keep pots moist but avoid excessively wet and excessively dry conditions. The first (within 2 days of planting) thorough watering should be a three-part preventative chemical drench. Then water sparingly until leaves unfurl. In week 3 or 4 reinoculate with a drench of Trichoderma and then a week later do a second chemical drench. Schedule these drenches to coincide with required watering to avoid overly wet pots.
Light
Calla can be exposed to full sunlight, unless the temperature in the greenhouse goes over 80° F, then some shading is recommended to avoid leafburn.
Fertilizer
Early fertility levels in calla, at the time of planting and extending two weeks, enhances overall long-term plant fullness and uniformity of vigor. A 10-20 day media incorporated pre-charge of nitrogen and potassium (no phosphorous in early pots) would be ideal.
Marketing
Market your pots with slightly less than one half the total number of expected blooms showing color or in spike. Ship long distances under refrigerated conditions (approximately 40° F or 5° C) to avoid excessive stretching. Retail under cool and bright conditions.
More DetailsCalla For 3 Gallon Pot (6" or 1 gallon pot instructions below)
Planting
Aethiopica are moisture loving. Use a well draining media with a pH of 5.5-6.5 that is high in organic matter. Plant 2" deep in containers or 3-4" deep in beds.
Light
Aethiopica will withstand a wide range of light conditions (500 to 5,000 candles). Higher light can be tolerated in cool and humid periods.
Plants can handle full sun to 70% shade without becoming too badly stressed, but 50% shade is ideal. Deeply shaded conditions will cause lengthened, but weakened stems
Temperature
Aethiopica tolerate a range of temperatures but prefers relatively cool temperatures. Optimum daytime temperatures are 55-65⁰F; nighttime 45-55⁰F; germination at 65-70⁰F until sprouting helps hasten rooting and establishment. Cool nights with clear days will promote shorter, stronger stems. Aethiopica are somewhat frost sensitive. Foliage will not withstand prolonged freezing temperatures. Bulbs can take some frost but not soil freeze to bulb depth.
Watering
Keep soil slightly moist until substantial sprouts emerge. Then keep soil slightly moist (but not soggy) until peak bloom then decrease moderately.
Fertilization
Proper fertility is critical for full plant growth with well-colored leaves and continued flower production in Aethiopica. Use a soil incorporated 30-day release preplant charge of nitrogen and potassium (containing little or no phosphorous). This will produce good early establishment of roots and improved early vigor. At approximately 3-4 weeks, begin a semi-balanced liquid feed @ 200 ppm weekly or 100 ppm constant using 20-10-20 or initially as needed. Modifications can then be made based on individual growth objectives and conditions. At leaf unfurling, reducing to 50 ppm alternated 1:1 with clear water will keep plants from getting too leafy. Alternately, consider the use of a low phosphorous fertilizer (i.e. 17-5-17) can result in better plant balance.
Height Control
Generally it is best to make a single PGR drench application when plants are at 1/2 to 3/4 desired plant height. Note that the require rate will depend primarily on the light, temperature, fertility and your bulb size & form. It’s often best to use apply Bonzi at 7.5-10 ppm @ 0.25-0.33oz/gal (2-2.6ml/L). 3.75-7.5 ppm @ 0.125-0.25oz/gal (1-2ml/L) should be used if: 1) lighter desired effects are desired; 2) earlier or multiple applications will be use; 3) smaller and/or clustered bulbs are being used. TOO HIGH A RATE OR TOO EARLY AN APPLICATION CAN CAUSE LEAF CRINKLING, PLANT ROSETTING, LACK OF BLOOM OR GENERAL STUNTING. If plants become over growth regulated, a GA rescue spray can be effective @100-200ppm GA3 or GA4+7 [and coupled with a mild surfactant]. *Bonzi rates higher than 10 ppm may arrest plant height completely.
Disease Prevention & Control
Aethiopica is generally susceptible to three (3) primary soil borne pathogens: Pythium & Phytophthora (“water molds”) plus Rhizoctonia and bacteria: Erwinia (Pectobacteria spp.). “Water molds” are often the first & most critical component in the disease complex, followed by Rhizoctonia. with the following preferred materials:
Once root injury occurs, Erwinia will often enter as a seconday infection. Our best tank mixed, four-part chemical drench targets the “3-pathogen complex”
1) WATER MOLD part 1- Subdue Maxx (mefenoxam 25.1% ai) @ 0.5-1oz/100 gal (4-8ml/100 L)
2) WATER MOLD part 2- Aliette (fosetyl-aluminum 80% ai) @ 13oz/100 gal (98gm/100 L)
3) RHIZOCTONIA- Heritage (azoxystrobin 50% ai) @ 4oz/100 gal (30gm/100 L)
4) ERWINIA- Agrimycin-17 (streptomycin sulfate 21.2% ai) @ 8-16oz/100 gal (60-120gm/100 L)
Pesticide drench timing is critical. Drench within the first 2-3 days of initial watering . Timing of the second drench should be made at 14 to 21 days. A third drench may be necessary 3-6 weeks after the second one (5-9 weeks from planting). *Always drench in the mornings or early enough for all foliage/runoff to dry thoroughly. Watch for leaf spot as leaves unfurl. Once leaf spot is observed, spray foliage to runoff with a selection of the following:
1) BACTERIAL LEAF SPOT part 1- Champ II (copper hydroxide 37.5%) @ 32-64oz/100 gal (240- 479ml/100 L
2) BACTERIAL LEAF SPOT part 2- Dithane (mancozeb 75%) @ 32oz/100 gal (24 ml/100 L)
3) FUNGAL LEAF SPOT option 1- Daconil Weather Stik (chlorothalonil @ 54%) @ 22oz/100 gal (165ml/100 L) option 2- Chipco 26019 26GT (iprodione @ 23.3%) @ 32oz/100 gal (240 ml/100 L) *DO NOT COMBINE FOLIAR COPPERS WITH ALIETTE OR OTHER ACIDIFYING PRODUCTS.
Inspect Crop Weekly. Routinely scout for cleared or browning roots, leaf spots, etc. • ALWAYS WATCH FOR ERWINIA INFECTED PLANTS TO CAREFULLYROGUE & DISCARD. Re-drench per recommendations if root problems are discovered, up to a total of three times over the life cycle. Sanitation is critical, especially in multiple cropping programs where rot can progress without an obvious cause. Sanitize benches, floors, conveyors, pots, soil mixers, etc. between crops.
Insects
Control Fungus Gnats and Shoreflies due to their ability to spread bacteria and other diseases. Control white flies, aphids and thrips on an as-needed basis.If aphid or thrips are present, use aggressive control measures since they are capable of rapidly spreading various viruses. Watch for early leaf chewing evidence from larvae after sprouting. Most materials can safely be applied at label rates; beware of chemical incompatibilities described on label(s).
Calla for 6" or 1 gallon pots
Storage After Arrival
Unpack on arrival. Dispose of any soft rot and wash hands to avoid spreading the bacterial to healthy bulbs. Place in well ventilated trays at 65° F for a couple of days prior to planting. This will insure any possible friction wounds caused by transit are well callused before planting. For long-term storage (6 weeks or more) keep well ventilated at 45° F and a relative humidity of 80%.
Potting Medium
Plant with 1 to 1 1/2" of medium over the tuber, rounded side down, sprouts (eyes) up. Pot sizes below 4 1/2" standard are more difficult to grow due to root volume restrictions (especially in clay pots). Suggested planting guide is one bulb per 4 1/2" pot and 2 bulbs per 6 1/4" pot. Additional care and management of fertility and irrigation are required in small or shallow pots because plants tend to be weaker, more easily stressed and, therefore more disease prone. The medium should be well drained, a pH of 6 - 6.5 and have good air porosity (optimal at 20% +/- 5%).
Watering
Water management is critical. Keep pots moist but avoid excessively wet and excessively dry conditions. The first (within 2 days of planting) thorough watering should be a three-part preventative chemical drench. Then water sparingly until leaves unfurl. In week 3 or 4 reinoculate with a drench of Trichoderma and then a week later do a second chemical drench. Schedule these drenches to coincide with required watering to avoid overly wet pots.
Light
Calla can be exposed to full sunlight, unless the temperature in the greenhouse goes over 80° F, then some shading is recommended to avoid leafburn.
Fertilizer
Early fertility levels in calla, at the time of planting and extending two weeks, enhances overall long-term plant fullness and uniformity of vigor. A 10-20 day media incorporated pre-charge of nitrogen and potassium (no phosphorous in early pots) would be ideal.
Marketing
Market your pots with slightly less than one half the total number of expected blooms showing color or in spike. Ship long distances under refrigerated conditions (approximately 40° F or 5° C) to avoid excessive stretching. Retail under cool and bright conditions.
More DetailsCalla For 3 Gallon Pot (6" or 1 gallon pot instructions below)
Planting
Aethiopica are moisture loving. Use a well draining media with a pH of 5.5-6.5 that is high in organic matter. Plant 2" deep in containers or 3-4" deep in beds.
Light
Aethiopica will withstand a wide range of light conditions (500 to 5,000 candles). Higher light can be tolerated in cool and humid periods.
Plants can handle full sun to 70% shade without becoming too badly stressed, but 50% shade is ideal. Deeply shaded conditions will cause lengthened, but weakened stems
Temperature
Aethiopica tolerate a range of temperatures but prefers relatively cool temperatures. Optimum daytime temperatures are 55-65⁰F; nighttime 45-55⁰F; germination at 65-70⁰F until sprouting helps hasten rooting and establishment. Cool nights with clear days will promote shorter, stronger stems. Aethiopica are somewhat frost sensitive. Foliage will not withstand prolonged freezing temperatures. Bulbs can take some frost but not soil freeze to bulb depth.
Watering
Keep soil slightly moist until substantial sprouts emerge. Then keep soil slightly moist (but not soggy) until peak bloom then decrease moderately.
Fertilization
Proper fertility is critical for full plant growth with well-colored leaves and continued flower production in Aethiopica. Use a soil incorporated 30-day release preplant charge of nitrogen and potassium (containing little or no phosphorous). This will produce good early establishment of roots and improved early vigor. At approximately 3-4 weeks, begin a semi-balanced liquid feed @ 200 ppm weekly or 100 ppm constant using 20-10-20 or initially as needed. Modifications can then be made based on individual growth objectives and conditions. At leaf unfurling, reducing to 50 ppm alternated 1:1 with clear water will keep plants from getting too leafy. Alternately, consider the use of a low phosphorous fertilizer (i.e. 17-5-17) can result in better plant balance.
Height Control
Generally it is best to make a single PGR drench application when plants are at 1/2 to 3/4 desired plant height. Note that the require rate will depend primarily on the light, temperature, fertility and your bulb size & form. It’s often best to use apply Bonzi at 7.5-10 ppm @ 0.25-0.33oz/gal (2-2.6ml/L). 3.75-7.5 ppm @ 0.125-0.25oz/gal (1-2ml/L) should be used if: 1) lighter desired effects are desired; 2) earlier or multiple applications will be use; 3) smaller and/or clustered bulbs are being used. TOO HIGH A RATE OR TOO EARLY AN APPLICATION CAN CAUSE LEAF CRINKLING, PLANT ROSETTING, LACK OF BLOOM OR GENERAL STUNTING. If plants become over growth regulated, a GA rescue spray can be effective @100-200ppm GA3 or GA4+7 [and coupled with a mild surfactant]. *Bonzi rates higher than 10 ppm may arrest plant height completely.
Disease Prevention & Control
Aethiopica is generally susceptible to three (3) primary soil borne pathogens: Pythium & Phytophthora (“water molds”) plus Rhizoctonia and bacteria: Erwinia (Pectobacteria spp.). “Water molds” are often the first & most critical component in the disease complex, followed by Rhizoctonia. with the following preferred materials:
Once root injury occurs, Erwinia will often enter as a seconday infection. Our best tank mixed, four-part chemical drench targets the “3-pathogen complex”
1) WATER MOLD part 1- Subdue Maxx (mefenoxam 25.1% ai) @ 0.5-1oz/100 gal (4-8ml/100 L)
2) WATER MOLD part 2- Aliette (fosetyl-aluminum 80% ai) @ 13oz/100 gal (98gm/100 L)
3) RHIZOCTONIA- Heritage (azoxystrobin 50% ai) @ 4oz/100 gal (30gm/100 L)
4) ERWINIA- Agrimycin-17 (streptomycin sulfate 21.2% ai) @ 8-16oz/100 gal (60-120gm/100 L)
Pesticide drench timing is critical. Drench within the first 2-3 days of initial watering . Timing of the second drench should be made at 14 to 21 days. A third drench may be necessary 3-6 weeks after the second one (5-9 weeks from planting). *Always drench in the mornings or early enough for all foliage/runoff to dry thoroughly. Watch for leaf spot as leaves unfurl. Once leaf spot is observed, spray foliage to runoff with a selection of the following:
1) BACTERIAL LEAF SPOT part 1- Champ II (copper hydroxide 37.5%) @ 32-64oz/100 gal (240- 479ml/100 L
2) BACTERIAL LEAF SPOT part 2- Dithane (mancozeb 75%) @ 32oz/100 gal (24 ml/100 L)
3) FUNGAL LEAF SPOT option 1- Daconil Weather Stik (chlorothalonil @ 54%) @ 22oz/100 gal (165ml/100 L) option 2- Chipco 26019 26GT (iprodione @ 23.3%) @ 32oz/100 gal (240 ml/100 L) *DO NOT COMBINE FOLIAR COPPERS WITH ALIETTE OR OTHER ACIDIFYING PRODUCTS.
Inspect Crop Weekly. Routinely scout for cleared or browning roots, leaf spots, etc. • ALWAYS WATCH FOR ERWINIA INFECTED PLANTS TO CAREFULLYROGUE & DISCARD. Re-drench per recommendations if root problems are discovered, up to a total of three times over the life cycle. Sanitation is critical, especially in multiple cropping programs where rot can progress without an obvious cause. Sanitize benches, floors, conveyors, pots, soil mixers, etc. between crops.
Insects
Control Fungus Gnats and Shoreflies due to their ability to spread bacteria and other diseases. Control white flies, aphids and thrips on an as-needed basis.If aphid or thrips are present, use aggressive control measures since they are capable of rapidly spreading various viruses. Watch for early leaf chewing evidence from larvae after sprouting. Most materials can safely be applied at label rates; beware of chemical incompatibilities described on label(s).
Calla for 6" or 1 gallon pots
Storage After Arrival
Unpack on arrival. Dispose of any soft rot and wash hands to avoid spreading the bacterial to healthy bulbs. Place in well ventilated trays at 65° F for a couple of days prior to planting. This will insure any possible friction wounds caused by transit are well callused before planting. For long-term storage (6 weeks or more) keep well ventilated at 45° F and a relative humidity of 80%.
Potting Medium
Plant with 1 to 1 1/2" of medium over the tuber, rounded side down, sprouts (eyes) up. Pot sizes below 4 1/2" standard are more difficult to grow due to root volume restrictions (especially in clay pots). Suggested planting guide is one bulb per 4 1/2" pot and 2 bulbs per 6 1/4" pot. Additional care and management of fertility and irrigation are required in small or shallow pots because plants tend to be weaker, more easily stressed and, therefore more disease prone. The medium should be well drained, a pH of 6 - 6.5 and have good air porosity (optimal at 20% +/- 5%).
Watering
Water management is critical. Keep pots moist but avoid excessively wet and excessively dry conditions. The first (within 2 days of planting) thorough watering should be a three-part preventative chemical drench. Then water sparingly until leaves unfurl. In week 3 or 4 reinoculate with a drench of Trichoderma and then a week later do a second chemical drench. Schedule these drenches to coincide with required watering to avoid overly wet pots.
Light
Calla can be exposed to full sunlight, unless the temperature in the greenhouse goes over 80° F, then some shading is recommended to avoid leafburn.
Fertilizer
Early fertility levels in calla, at the time of planting and extending two weeks, enhances overall long-term plant fullness and uniformity of vigor. A 10-20 day media incorporated pre-charge of nitrogen and potassium (no phosphorous in early pots) would be ideal.
Marketing
Market your pots with slightly less than one half the total number of expected blooms showing color or in spike. Ship long distances under refrigerated conditions (approximately 40° F or 5° C) to avoid excessive stretching. Retail under cool and bright conditions.
More DetailsCalla For 3 Gallon Pot (6" or 1 gallon pot instructions below)
Planting
Aethiopica are moisture loving. Use a well draining media with a pH of 5.5-6.5 that is high in organic matter. Plant 2" deep in containers or 3-4" deep in beds.
Light
Aethiopica will withstand a wide range of light conditions (500 to 5,000 candles). Higher light can be tolerated in cool and humid periods.
Plants can handle full sun to 70% shade without becoming too badly stressed, but 50% shade is ideal. Deeply shaded conditions will cause lengthened, but weakened stems
Temperature
Aethiopica tolerate a range of temperatures but prefers relatively cool temperatures. Optimum daytime temperatures are 55-65⁰F; nighttime 45-55⁰F; germination at 65-70⁰F until sprouting helps hasten rooting and establishment. Cool nights with clear days will promote shorter, stronger stems. Aethiopica are somewhat frost sensitive. Foliage will not withstand prolonged freezing temperatures. Bulbs can take some frost but not soil freeze to bulb depth.
Watering
Keep soil slightly moist until substantial sprouts emerge. Then keep soil slightly moist (but not soggy) until peak bloom then decrease moderately.
Fertilization
Proper fertility is critical for full plant growth with well-colored leaves and continued flower production in Aethiopica. Use a soil incorporated 30-day release preplant charge of nitrogen and potassium (containing little or no phosphorous). This will produce good early establishment of roots and improved early vigor. At approximately 3-4 weeks, begin a semi-balanced liquid feed @ 200 ppm weekly or 100 ppm constant using 20-10-20 or initially as needed. Modifications can then be made based on individual growth objectives and conditions. At leaf unfurling, reducing to 50 ppm alternated 1:1 with clear water will keep plants from getting too leafy. Alternately, consider the use of a low phosphorous fertilizer (i.e. 17-5-17) can result in better plant balance.
Height Control
Generally it is best to make a single PGR drench application when plants are at 1/2 to 3/4 desired plant height. Note that the require rate will depend primarily on the light, temperature, fertility and your bulb size & form. It’s often best to use apply Bonzi at 7.5-10 ppm @ 0.25-0.33oz/gal (2-2.6ml/L). 3.75-7.5 ppm @ 0.125-0.25oz/gal (1-2ml/L) should be used if: 1) lighter desired effects are desired; 2) earlier or multiple applications will be use; 3) smaller and/or clustered bulbs are being used. TOO HIGH A RATE OR TOO EARLY AN APPLICATION CAN CAUSE LEAF CRINKLING, PLANT ROSETTING, LACK OF BLOOM OR GENERAL STUNTING. If plants become over growth regulated, a GA rescue spray can be effective @100-200ppm GA3 or GA4+7 [and coupled with a mild surfactant]. *Bonzi rates higher than 10 ppm may arrest plant height completely.
Disease Prevention & Control
Aethiopica is generally susceptible to three (3) primary soil borne pathogens: Pythium & Phytophthora (“water molds”) plus Rhizoctonia and bacteria: Erwinia (Pectobacteria spp.). “Water molds” are often the first & most critical component in the disease complex, followed by Rhizoctonia. with the following preferred materials:
Once root injury occurs, Erwinia will often enter as a seconday infection. Our best tank mixed, four-part chemical drench targets the “3-pathogen complex”
1) WATER MOLD part 1- Subdue Maxx (mefenoxam 25.1% ai) @ 0.5-1oz/100 gal (4-8ml/100 L)
2) WATER MOLD part 2- Aliette (fosetyl-aluminum 80% ai) @ 13oz/100 gal (98gm/100 L)
3) RHIZOCTONIA- Heritage (azoxystrobin 50% ai) @ 4oz/100 gal (30gm/100 L)
4) ERWINIA- Agrimycin-17 (streptomycin sulfate 21.2% ai) @ 8-16oz/100 gal (60-120gm/100 L)
Pesticide drench timing is critical. Drench within the first 2-3 days of initial watering . Timing of the second drench should be made at 14 to 21 days. A third drench may be necessary 3-6 weeks after the second one (5-9 weeks from planting). *Always drench in the mornings or early enough for all foliage/runoff to dry thoroughly. Watch for leaf spot as leaves unfurl. Once leaf spot is observed, spray foliage to runoff with a selection of the following:
1) BACTERIAL LEAF SPOT part 1- Champ II (copper hydroxide 37.5%) @ 32-64oz/100 gal (240- 479ml/100 L
2) BACTERIAL LEAF SPOT part 2- Dithane (mancozeb 75%) @ 32oz/100 gal (24 ml/100 L)
3) FUNGAL LEAF SPOT option 1- Daconil Weather Stik (chlorothalonil @ 54%) @ 22oz/100 gal (165ml/100 L) option 2- Chipco 26019 26GT (iprodione @ 23.3%) @ 32oz/100 gal (240 ml/100 L) *DO NOT COMBINE FOLIAR COPPERS WITH ALIETTE OR OTHER ACIDIFYING PRODUCTS.
Inspect Crop Weekly. Routinely scout for cleared or browning roots, leaf spots, etc. • ALWAYS WATCH FOR ERWINIA INFECTED PLANTS TO CAREFULLYROGUE & DISCARD. Re-drench per recommendations if root problems are discovered, up to a total of three times over the life cycle. Sanitation is critical, especially in multiple cropping programs where rot can progress without an obvious cause. Sanitize benches, floors, conveyors, pots, soil mixers, etc. between crops.
Insects
Control Fungus Gnats and Shoreflies due to their ability to spread bacteria and other diseases. Control white flies, aphids and thrips on an as-needed basis.If aphid or thrips are present, use aggressive control measures since they are capable of rapidly spreading various viruses. Watch for early leaf chewing evidence from larvae after sprouting. Most materials can safely be applied at label rates; beware of chemical incompatibilities described on label(s).
Calla for 6" or 1 gallon pots
Storage After Arrival
Unpack on arrival. Dispose of any soft rot and wash hands to avoid spreading the bacterial to healthy bulbs. Place in well ventilated trays at 65° F for a couple of days prior to planting. This will insure any possible friction wounds caused by transit are well callused before planting. For long-term storage (6 weeks or more) keep well ventilated at 45° F and a relative humidity of 80%.
Potting Medium
Plant with 1 to 1 1/2" of medium over the tuber, rounded side down, sprouts (eyes) up. Pot sizes below 4 1/2" standard are more difficult to grow due to root volume restrictions (especially in clay pots). Suggested planting guide is one bulb per 4 1/2" pot and 2 bulbs per 6 1/4" pot. Additional care and management of fertility and irrigation are required in small or shallow pots because plants tend to be weaker, more easily stressed and, therefore more disease prone. The medium should be well drained, a pH of 6 - 6.5 and have good air porosity (optimal at 20% +/- 5%).
Watering
Water management is critical. Keep pots moist but avoid excessively wet and excessively dry conditions. The first (within 2 days of planting) thorough watering should be a three-part preventative chemical drench. Then water sparingly until leaves unfurl. In week 3 or 4 reinoculate with a drench of Trichoderma and then a week later do a second chemical drench. Schedule these drenches to coincide with required watering to avoid overly wet pots.
Light
Calla can be exposed to full sunlight, unless the temperature in the greenhouse goes over 80° F, then some shading is recommended to avoid leafburn.
Fertilizer
Early fertility levels in calla, at the time of planting and extending two weeks, enhances overall long-term plant fullness and uniformity of vigor. A 10-20 day media incorporated pre-charge of nitrogen and potassium (no phosphorous in early pots) would be ideal.
Marketing
Market your pots with slightly less than one half the total number of expected blooms showing color or in spike. Ship long distances under refrigerated conditions (approximately 40° F or 5° C) to avoid excessive stretching. Retail under cool and bright conditions.
More DetailsCalla For 3 Gallon Pot (6" or 1 gallon pot instructions below)
Planting
Aethiopica are moisture loving. Use a well draining media with a pH of 5.5-6.5 that is high in organic matter. Plant 2" deep in containers or 3-4" deep in beds.
Light
Aethiopica will withstand a wide range of light conditions (500 to 5,000 candles). Higher light can be tolerated in cool and humid periods.
Plants can handle full sun to 70% shade without becoming too badly stressed, but 50% shade is ideal. Deeply shaded conditions will cause lengthened, but weakened stems
Temperature
Aethiopica tolerate a range of temperatures but prefers relatively cool temperatures. Optimum daytime temperatures are 55-65⁰F; nighttime 45-55⁰F; germination at 65-70⁰F until sprouting helps hasten rooting and establishment. Cool nights with clear days will promote shorter, stronger stems. Aethiopica are somewhat frost sensitive. Foliage will not withstand prolonged freezing temperatures. Bulbs can take some frost but not soil freeze to bulb depth.
Watering
Keep soil slightly moist until substantial sprouts emerge. Then keep soil slightly moist (but not soggy) until peak bloom then decrease moderately.
Fertilization
Proper fertility is critical for full plant growth with well-colored leaves and continued flower production in Aethiopica. Use a soil incorporated 30-day release preplant charge of nitrogen and potassium (containing little or no phosphorous). This will produce good early establishment of roots and improved early vigor. At approximately 3-4 weeks, begin a semi-balanced liquid feed @ 200 ppm weekly or 100 ppm constant using 20-10-20 or initially as needed. Modifications can then be made based on individual growth objectives and conditions. At leaf unfurling, reducing to 50 ppm alternated 1:1 with clear water will keep plants from getting too leafy. Alternately, consider the use of a low phosphorous fertilizer (i.e. 17-5-17) can result in better plant balance.
Height Control
Generally it is best to make a single PGR drench application when plants are at 1/2 to 3/4 desired plant height. Note that the require rate will depend primarily on the light, temperature, fertility and your bulb size & form. It’s often best to use apply Bonzi at 7.5-10 ppm @ 0.25-0.33oz/gal (2-2.6ml/L). 3.75-7.5 ppm @ 0.125-0.25oz/gal (1-2ml/L) should be used if: 1) lighter desired effects are desired; 2) earlier or multiple applications will be use; 3) smaller and/or clustered bulbs are being used. TOO HIGH A RATE OR TOO EARLY AN APPLICATION CAN CAUSE LEAF CRINKLING, PLANT ROSETTING, LACK OF BLOOM OR GENERAL STUNTING. If plants become over growth regulated, a GA rescue spray can be effective @100-200ppm GA3 or GA4+7 [and coupled with a mild surfactant]. *Bonzi rates higher than 10 ppm may arrest plant height completely.
Disease Prevention & Control
Aethiopica is generally susceptible to three (3) primary soil borne pathogens: Pythium & Phytophthora (“water molds”) plus Rhizoctonia and bacteria: Erwinia (Pectobacteria spp.). “Water molds” are often the first & most critical component in the disease complex, followed by Rhizoctonia. with the following preferred materials:
Once root injury occurs, Erwinia will often enter as a seconday infection. Our best tank mixed, four-part chemical drench targets the “3-pathogen complex”
1) WATER MOLD part 1- Subdue Maxx (mefenoxam 25.1% ai) @ 0.5-1oz/100 gal (4-8ml/100 L)
2) WATER MOLD part 2- Aliette (fosetyl-aluminum 80% ai) @ 13oz/100 gal (98gm/100 L)
3) RHIZOCTONIA- Heritage (azoxystrobin 50% ai) @ 4oz/100 gal (30gm/100 L)
4) ERWINIA- Agrimycin-17 (streptomycin sulfate 21.2% ai) @ 8-16oz/100 gal (60-120gm/100 L)
Pesticide drench timing is critical. Drench within the first 2-3 days of initial watering . Timing of the second drench should be made at 14 to 21 days. A third drench may be necessary 3-6 weeks after the second one (5-9 weeks from planting). *Always drench in the mornings or early enough for all foliage/runoff to dry thoroughly. Watch for leaf spot as leaves unfurl. Once leaf spot is observed, spray foliage to runoff with a selection of the following:
1) BACTERIAL LEAF SPOT part 1- Champ II (copper hydroxide 37.5%) @ 32-64oz/100 gal (240- 479ml/100 L
2) BACTERIAL LEAF SPOT part 2- Dithane (mancozeb 75%) @ 32oz/100 gal (24 ml/100 L)
3) FUNGAL LEAF SPOT option 1- Daconil Weather Stik (chlorothalonil @ 54%) @ 22oz/100 gal (165ml/100 L) option 2- Chipco 26019 26GT (iprodione @ 23.3%) @ 32oz/100 gal (240 ml/100 L) *DO NOT COMBINE FOLIAR COPPERS WITH ALIETTE OR OTHER ACIDIFYING PRODUCTS.
Inspect Crop Weekly. Routinely scout for cleared or browning roots, leaf spots, etc. • ALWAYS WATCH FOR ERWINIA INFECTED PLANTS TO CAREFULLYROGUE & DISCARD. Re-drench per recommendations if root problems are discovered, up to a total of three times over the life cycle. Sanitation is critical, especially in multiple cropping programs where rot can progress without an obvious cause. Sanitize benches, floors, conveyors, pots, soil mixers, etc. between crops.
Insects
Control Fungus Gnats and Shoreflies due to their ability to spread bacteria and other diseases. Control white flies, aphids and thrips on an as-needed basis.If aphid or thrips are present, use aggressive control measures since they are capable of rapidly spreading various viruses. Watch for early leaf chewing evidence from larvae after sprouting. Most materials can safely be applied at label rates; beware of chemical incompatibilities described on label(s).
Calla for 6" or 1 gallon pots
Storage After Arrival
Unpack on arrival. Dispose of any soft rot and wash hands to avoid spreading the bacterial to healthy bulbs. Place in well ventilated trays at 65° F for a couple of days prior to planting. This will insure any possible friction wounds caused by transit are well callused before planting. For long-term storage (6 weeks or more) keep well ventilated at 45° F and a relative humidity of 80%.
Potting Medium
Plant with 1 to 1 1/2" of medium over the tuber, rounded side down, sprouts (eyes) up. Pot sizes below 4 1/2" standard are more difficult to grow due to root volume restrictions (especially in clay pots). Suggested planting guide is one bulb per 4 1/2" pot and 2 bulbs per 6 1/4" pot. Additional care and management of fertility and irrigation are required in small or shallow pots because plants tend to be weaker, more easily stressed and, therefore more disease prone. The medium should be well drained, a pH of 6 - 6.5 and have good air porosity (optimal at 20% +/- 5%).
Watering
Water management is critical. Keep pots moist but avoid excessively wet and excessively dry conditions. The first (within 2 days of planting) thorough watering should be a three-part preventative chemical drench. Then water sparingly until leaves unfurl. In week 3 or 4 reinoculate with a drench of Trichoderma and then a week later do a second chemical drench. Schedule these drenches to coincide with required watering to avoid overly wet pots.
Light
Calla can be exposed to full sunlight, unless the temperature in the greenhouse goes over 80° F, then some shading is recommended to avoid leafburn.
Fertilizer
Early fertility levels in calla, at the time of planting and extending two weeks, enhances overall long-term plant fullness and uniformity of vigor. A 10-20 day media incorporated pre-charge of nitrogen and potassium (no phosphorous in early pots) would be ideal.
Marketing
Market your pots with slightly less than one half the total number of expected blooms showing color or in spike. Ship long distances under refrigerated conditions (approximately 40° F or 5° C) to avoid excessive stretching. Retail under cool and bright conditions.
More DetailsCalla For 3 Gallon Pot (6" or 1 gallon pot instructions below)
Planting
Aethiopica are moisture loving. Use a well draining media with a pH of 5.5-6.5 that is high in organic matter. Plant 2" deep in containers or 3-4" deep in beds.
Light
Aethiopica will withstand a wide range of light conditions (500 to 5,000 candles). Higher light can be tolerated in cool and humid periods.
Plants can handle full sun to 70% shade without becoming too badly stressed, but 50% shade is ideal. Deeply shaded conditions will cause lengthened, but weakened stems
Temperature
Aethiopica tolerate a range of temperatures but prefers relatively cool temperatures. Optimum daytime temperatures are 55-65⁰F; nighttime 45-55⁰F; germination at 65-70⁰F until sprouting helps hasten rooting and establishment. Cool nights with clear days will promote shorter, stronger stems. Aethiopica are somewhat frost sensitive. Foliage will not withstand prolonged freezing temperatures. Bulbs can take some frost but not soil freeze to bulb depth.
Watering
Keep soil slightly moist until substantial sprouts emerge. Then keep soil slightly moist (but not soggy) until peak bloom then decrease moderately.
Fertilization
Proper fertility is critical for full plant growth with well-colored leaves and continued flower production in Aethiopica. Use a soil incorporated 30-day release preplant charge of nitrogen and potassium (containing little or no phosphorous). This will produce good early establishment of roots and improved early vigor. At approximately 3-4 weeks, begin a semi-balanced liquid feed @ 200 ppm weekly or 100 ppm constant using 20-10-20 or initially as needed. Modifications can then be made based on individual growth objectives and conditions. At leaf unfurling, reducing to 50 ppm alternated 1:1 with clear water will keep plants from getting too leafy. Alternately, consider the use of a low phosphorous fertilizer (i.e. 17-5-17) can result in better plant balance.
Height Control
Generally it is best to make a single PGR drench application when plants are at 1/2 to 3/4 desired plant height. Note that the require rate will depend primarily on the light, temperature, fertility and your bulb size & form. It’s often best to use apply Bonzi at 7.5-10 ppm @ 0.25-0.33oz/gal (2-2.6ml/L). 3.75-7.5 ppm @ 0.125-0.25oz/gal (1-2ml/L) should be used if: 1) lighter desired effects are desired; 2) earlier or multiple applications will be use; 3) smaller and/or clustered bulbs are being used. TOO HIGH A RATE OR TOO EARLY AN APPLICATION CAN CAUSE LEAF CRINKLING, PLANT ROSETTING, LACK OF BLOOM OR GENERAL STUNTING. If plants become over growth regulated, a GA rescue spray can be effective @100-200ppm GA3 or GA4+7 [and coupled with a mild surfactant]. *Bonzi rates higher than 10 ppm may arrest plant height completely.
Disease Prevention & Control
Aethiopica is generally susceptible to three (3) primary soil borne pathogens: Pythium & Phytophthora (“water molds”) plus Rhizoctonia and bacteria: Erwinia (Pectobacteria spp.). “Water molds” are often the first & most critical component in the disease complex, followed by Rhizoctonia. with the following preferred materials:
Once root injury occurs, Erwinia will often enter as a seconday infection. Our best tank mixed, four-part chemical drench targets the “3-pathogen complex”
1) WATER MOLD part 1- Subdue Maxx (mefenoxam 25.1% ai) @ 0.5-1oz/100 gal (4-8ml/100 L)
2) WATER MOLD part 2- Aliette (fosetyl-aluminum 80% ai) @ 13oz/100 gal (98gm/100 L)
3) RHIZOCTONIA- Heritage (azoxystrobin 50% ai) @ 4oz/100 gal (30gm/100 L)
4) ERWINIA- Agrimycin-17 (streptomycin sulfate 21.2% ai) @ 8-16oz/100 gal (60-120gm/100 L)
Pesticide drench timing is critical. Drench within the first 2-3 days of initial watering . Timing of the second drench should be made at 14 to 21 days. A third drench may be necessary 3-6 weeks after the second one (5-9 weeks from planting). *Always drench in the mornings or early enough for all foliage/runoff to dry thoroughly. Watch for leaf spot as leaves unfurl. Once leaf spot is observed, spray foliage to runoff with a selection of the following:
1) BACTERIAL LEAF SPOT part 1- Champ II (copper hydroxide 37.5%) @ 32-64oz/100 gal (240- 479ml/100 L
2) BACTERIAL LEAF SPOT part 2- Dithane (mancozeb 75%) @ 32oz/100 gal (24 ml/100 L)
3) FUNGAL LEAF SPOT option 1- Daconil Weather Stik (chlorothalonil @ 54%) @ 22oz/100 gal (165ml/100 L) option 2- Chipco 26019 26GT (iprodione @ 23.3%) @ 32oz/100 gal (240 ml/100 L) *DO NOT COMBINE FOLIAR COPPERS WITH ALIETTE OR OTHER ACIDIFYING PRODUCTS.
Inspect Crop Weekly. Routinely scout for cleared or browning roots, leaf spots, etc. • ALWAYS WATCH FOR ERWINIA INFECTED PLANTS TO CAREFULLYROGUE & DISCARD. Re-drench per recommendations if root problems are discovered, up to a total of three times over the life cycle. Sanitation is critical, especially in multiple cropping programs where rot can progress without an obvious cause. Sanitize benches, floors, conveyors, pots, soil mixers, etc. between crops.
Insects
Control Fungus Gnats and Shoreflies due to their ability to spread bacteria and other diseases. Control white flies, aphids and thrips on an as-needed basis.If aphid or thrips are present, use aggressive control measures since they are capable of rapidly spreading various viruses. Watch for early leaf chewing evidence from larvae after sprouting. Most materials can safely be applied at label rates; beware of chemical incompatibilities described on label(s).
Calla for 6" or 1 gallon pots
Storage After Arrival
Unpack on arrival. Dispose of any soft rot and wash hands to avoid spreading the bacterial to healthy bulbs. Place in well ventilated trays at 65° F for a couple of days prior to planting. This will insure any possible friction wounds caused by transit are well callused before planting. For long-term storage (6 weeks or more) keep well ventilated at 45° F and a relative humidity of 80%.
Potting Medium
Plant with 1 to 1 1/2" of medium over the tuber, rounded side down, sprouts (eyes) up. Pot sizes below 4 1/2" standard are more difficult to grow due to root volume restrictions (especially in clay pots). Suggested planting guide is one bulb per 4 1/2" pot and 2 bulbs per 6 1/4" pot. Additional care and management of fertility and irrigation are required in small or shallow pots because plants tend to be weaker, more easily stressed and, therefore more disease prone. The medium should be well drained, a pH of 6 - 6.5 and have good air porosity (optimal at 20% +/- 5%).
Watering
Water management is critical. Keep pots moist but avoid excessively wet and excessively dry conditions. The first (within 2 days of planting) thorough watering should be a three-part preventative chemical drench. Then water sparingly until leaves unfurl. In week 3 or 4 reinoculate with a drench of Trichoderma and then a week later do a second chemical drench. Schedule these drenches to coincide with required watering to avoid overly wet pots.
Light
Calla can be exposed to full sunlight, unless the temperature in the greenhouse goes over 80° F, then some shading is recommended to avoid leafburn.
Fertilizer
Early fertility levels in calla, at the time of planting and extending two weeks, enhances overall long-term plant fullness and uniformity of vigor. A 10-20 day media incorporated pre-charge of nitrogen and potassium (no phosphorous in early pots) would be ideal.
Marketing
Market your pots with slightly less than one half the total number of expected blooms showing color or in spike. Ship long distances under refrigerated conditions (approximately 40° F or 5° C) to avoid excessive stretching. Retail under cool and bright conditions.
More DetailsCalla For 3 Gallon Pot (6" or 1 gallon pot instructions below)
Planting
Aethiopica are moisture loving. Use a well draining media with a pH of 5.5-6.5 that is high in organic matter. Plant 2" deep in containers or 3-4" deep in beds.
Light
Aethiopica will withstand a wide range of light conditions (500 to 5,000 candles). Higher light can be tolerated in cool and humid periods.
Plants can handle full sun to 70% shade without becoming too badly stressed, but 50% shade is ideal. Deeply shaded conditions will cause lengthened, but weakened stems
Temperature
Aethiopica tolerate a range of temperatures but prefers relatively cool temperatures. Optimum daytime temperatures are 55-65⁰F; nighttime 45-55⁰F; germination at 65-70⁰F until sprouting helps hasten rooting and establishment. Cool nights with clear days will promote shorter, stronger stems. Aethiopica are somewhat frost sensitive. Foliage will not withstand prolonged freezing temperatures. Bulbs can take some frost but not soil freeze to bulb depth.
Watering
Keep soil slightly moist until substantial sprouts emerge. Then keep soil slightly moist (but not soggy) until peak bloom then decrease moderately.
Fertilization
Proper fertility is critical for full plant growth with well-colored leaves and continued flower production in Aethiopica. Use a soil incorporated 30-day release preplant charge of nitrogen and potassium (containing little or no phosphorous). This will produce good early establishment of roots and improved early vigor. At approximately 3-4 weeks, begin a semi-balanced liquid feed @ 200 ppm weekly or 100 ppm constant using 20-10-20 or initially as needed. Modifications can then be made based on individual growth objectives and conditions. At leaf unfurling, reducing to 50 ppm alternated 1:1 with clear water will keep plants from getting too leafy. Alternately, consider the use of a low phosphorous fertilizer (i.e. 17-5-17) can result in better plant balance.
Height Control
Generally it is best to make a single PGR drench application when plants are at 1/2 to 3/4 desired plant height. Note that the require rate will depend primarily on the light, temperature, fertility and your bulb size & form. It’s often best to use apply Bonzi at 7.5-10 ppm @ 0.25-0.33oz/gal (2-2.6ml/L). 3.75-7.5 ppm @ 0.125-0.25oz/gal (1-2ml/L) should be used if: 1) lighter desired effects are desired; 2) earlier or multiple applications will be use; 3) smaller and/or clustered bulbs are being used. TOO HIGH A RATE OR TOO EARLY AN APPLICATION CAN CAUSE LEAF CRINKLING, PLANT ROSETTING, LACK OF BLOOM OR GENERAL STUNTING. If plants become over growth regulated, a GA rescue spray can be effective @100-200ppm GA3 or GA4+7 [and coupled with a mild surfactant]. *Bonzi rates higher than 10 ppm may arrest plant height completely.
Disease Prevention & Control
Aethiopica is generally susceptible to three (3) primary soil borne pathogens: Pythium & Phytophthora (“water molds”) plus Rhizoctonia and bacteria: Erwinia (Pectobacteria spp.). “Water molds” are often the first & most critical component in the disease complex, followed by Rhizoctonia. with the following preferred materials:
Once root injury occurs, Erwinia will often enter as a seconday infection. Our best tank mixed, four-part chemical drench targets the “3-pathogen complex”
1) WATER MOLD part 1- Subdue Maxx (mefenoxam 25.1% ai) @ 0.5-1oz/100 gal (4-8ml/100 L)
2) WATER MOLD part 2- Aliette (fosetyl-aluminum 80% ai) @ 13oz/100 gal (98gm/100 L)
3) RHIZOCTONIA- Heritage (azoxystrobin 50% ai) @ 4oz/100 gal (30gm/100 L)
4) ERWINIA- Agrimycin-17 (streptomycin sulfate 21.2% ai) @ 8-16oz/100 gal (60-120gm/100 L)
Pesticide drench timing is critical. Drench within the first 2-3 days of initial watering . Timing of the second drench should be made at 14 to 21 days. A third drench may be necessary 3-6 weeks after the second one (5-9 weeks from planting). *Always drench in the mornings or early enough for all foliage/runoff to dry thoroughly. Watch for leaf spot as leaves unfurl. Once leaf spot is observed, spray foliage to runoff with a selection of the following:
1) BACTERIAL LEAF SPOT part 1- Champ II (copper hydroxide 37.5%) @ 32-64oz/100 gal (240- 479ml/100 L
2) BACTERIAL LEAF SPOT part 2- Dithane (mancozeb 75%) @ 32oz/100 gal (24 ml/100 L)
3) FUNGAL LEAF SPOT option 1- Daconil Weather Stik (chlorothalonil @ 54%) @ 22oz/100 gal (165ml/100 L) option 2- Chipco 26019 26GT (iprodione @ 23.3%) @ 32oz/100 gal (240 ml/100 L) *DO NOT COMBINE FOLIAR COPPERS WITH ALIETTE OR OTHER ACIDIFYING PRODUCTS.
Inspect Crop Weekly. Routinely scout for cleared or browning roots, leaf spots, etc. • ALWAYS WATCH FOR ERWINIA INFECTED PLANTS TO CAREFULLYROGUE & DISCARD. Re-drench per recommendations if root problems are discovered, up to a total of three times over the life cycle. Sanitation is critical, especially in multiple cropping programs where rot can progress without an obvious cause. Sanitize benches, floors, conveyors, pots, soil mixers, etc. between crops.
Insects
Control Fungus Gnats and Shoreflies due to their ability to spread bacteria and other diseases. Control white flies, aphids and thrips on an as-needed basis.If aphid or thrips are present, use aggressive control measures since they are capable of rapidly spreading various viruses. Watch for early leaf chewing evidence from larvae after sprouting. Most materials can safely be applied at label rates; beware of chemical incompatibilities described on label(s).
Calla for 6" or 1 gallon pots
Storage After Arrival
Unpack on arrival. Dispose of any soft rot and wash hands to avoid spreading the bacterial to healthy bulbs. Place in well ventilated trays at 65° F for a couple of days prior to planting. This will insure any possible friction wounds caused by transit are well callused before planting. For long-term storage (6 weeks or more) keep well ventilated at 45° F and a relative humidity of 80%.
Potting Medium
Plant with 1 to 1 1/2" of medium over the tuber, rounded side down, sprouts (eyes) up. Pot sizes below 4 1/2" standard are more difficult to grow due to root volume restrictions (especially in clay pots). Suggested planting guide is one bulb per 4 1/2" pot and 2 bulbs per 6 1/4" pot. Additional care and management of fertility and irrigation are required in small or shallow pots because plants tend to be weaker, more easily stressed and, therefore more disease prone. The medium should be well drained, a pH of 6 - 6.5 and have good air porosity (optimal at 20% +/- 5%).
Watering
Water management is critical. Keep pots moist but avoid excessively wet and excessively dry conditions. The first (within 2 days of planting) thorough watering should be a three-part preventative chemical drench. Then water sparingly until leaves unfurl. In week 3 or 4 reinoculate with a drench of Trichoderma and then a week later do a second chemical drench. Schedule these drenches to coincide with required watering to avoid overly wet pots.
Light
Calla can be exposed to full sunlight, unless the temperature in the greenhouse goes over 80° F, then some shading is recommended to avoid leafburn.
Fertilizer
Early fertility levels in calla, at the time of planting and extending two weeks, enhances overall long-term plant fullness and uniformity of vigor. A 10-20 day media incorporated pre-charge of nitrogen and potassium (no phosphorous in early pots) would be ideal.
Marketing
Market your pots with slightly less than one half the total number of expected blooms showing color or in spike. Ship long distances under refrigerated conditions (approximately 40° F or 5° C) to avoid excessive stretching. Retail under cool and bright conditions.
More DetailsDeciduous and evergreen tuberous-rooted plants with strap-shaped leaves. Clusters of white funnel-shaped flowers.
More DetailsSoil Preparation and Planting
Best grown in fertile, humusy, organically rich, medium to wet soils in part shade or filtered sun. In general, green types can take higher light levels; dark-leaved ones need shade. Once nighttime temperatures are consistently 50-60° F, plant each bulb 6-8" deep and 2-4 feet apart. Water generously.
Fertilization
Fertilize Colocasia every three weeks during fall and winter. Use a liquid plant food with a balanced N-P-K ratio such as 10-10-10 or 20-20-20, diluted to half the strength recommended on the label. Water the fertilizer deeply into the soil immediately after application.
Water
Elephant ears are high water plants. Water as needed to keep the soil consistently moist, and don't allow the soil to become dry. Colocasia likes wet soil and is even appropriate for planting next to a pond, or in water up to 6 inches deep. Check the soil often if the bulbs are planted in sunlight.
Fall Care and Storage
Dig Colocasia bulbs after the first frost in autumn if you live in a climate with cold winters. Cut the foliage down to 2 to 4 inches before cutting. Allow the bulbs to dry for a day, and then place the bulbs in a box of wood shavings or peat moss. Store the box where the temperatures don't drop below 45°F.
More DetailsCaladiums require a warm, moist soil. A minimum of soil temperature of 78-80 F is preferred. If planted too early in spring, cool soil temperatures will cause tubers to rot before they sprout. They can be started indoors in moist peat moss or potting soil in containers such as a shallow flat or flower pot. Barely cover tubers with soil and place the container in a warm germination room with bright light. Tubers should be started indoors approximately four weeks before planting outdoors.
More DetailsCaladiums require a warm, moist soil. A minimum of soil temperature of 78-80 F is preferred. If planted too early in spring, cool soil temperatures will cause tubers to rot before they sprout. They can be started indoors in moist peat moss or potting soil in containers such as a shallow flat or flower pot. Barely cover tubers with soil and place the container in a warm germination room with bright light. Tubers should be started indoors approximately four weeks before planting outdoors.
More DetailsCanna can be planted anytime of the year in southern zones but the soil temperature should be 78-80° F. In zones 3-8, plant in spring and summer when ground temperature is not below 65°F. They should be started indoors one month prior to moving outside. Canna prefer a sunny location in moist, fertile soil. When planting outside, prepare soil by spading and adding compost or rotted manure. Rhizomes should be planted 1 - 1/2" deep and spaced 18-24" apart. Soak well after planting. For container planting, pot one rhizome per gallon in well drained potting mix. Containers will finish in 10-12 weeks when potted during the appropriate temperatures: Daytime 70-75° F; Night 65-70° F. Fertilize established (2-3 weeks) plants monthly with 1:2:1 ratio (12:24:12 or 5:10:5), fertilizing at 1/2 the package recommendation. NPK at 200 ppm weekly in injector fed systems.
More DetailsCanna can be planted anytime of the year in southern zones but the soil temperature should be 78-80° F. In zones 3-8, plant in spring and summer when ground temperature is not below 65°F. They should be started indoors one month prior to moving outside. Canna prefer a sunny location in moist, fertile soil. When planting outside, prepare soil by spading and adding compost or rotted manure. Rhizomes should be planted 1 - 1/2" deep and spaced 18-24" apart. Soak well after planting. For container planting, pot one rhizome per gallon in well drained potting mix. Containers will finish in 10-12 weeks when potted during the appropriate temperatures: Daytime 70-75° F; Night 65-70° F. Fertilize established (2-3 weeks) plants monthly with 1:2:1 ratio (12:24:12 or 5:10:5), fertilizing at 1/2 the package recommendation. NPK at 200 ppm weekly in injector fed systems.
More DetailsCanna can be planted anytime of the year in southern zones but the soil temperature should be 78-80° F. In zones 3-8, plant in spring and summer when ground temperature is not below 65°F. They should be started indoors one month prior to moving outside. Canna prefer a sunny location in moist, fertile soil. When planting outside, prepare soil by spading and adding compost or rotted manure. Rhizomes should be planted 1 - 1/2" deep and spaced 18-24" apart. Soak well after planting. For container planting, pot one rhizome per gallon in well drained potting mix. Containers will finish in 10-12 weeks when potted during the appropriate temperatures: Daytime 70-75° F; Night 65-70° F. Fertilize established (2-3 weeks) plants monthly with 1:2:1 ratio (12:24:12 or 5:10:5), fertilizing at 1/2 the package recommendation. NPK at 200 ppm weekly in injector fed systems.
More DetailsCanna can be planted anytime of the year in southern zones but the soil temperature should be 78-80° F. In zones 3-8, plant in spring and summer when ground temperature is not below 65°F. They should be started indoors one month prior to moving outside. Canna prefer a sunny location in moist, fertile soil. When planting outside, prepare soil by spading and adding compost or rotted manure. Rhizomes should be planted 1 - 1/2" deep and spaced 18-24" apart. Soak well after planting. For container planting, pot one rhizome per gallon in well drained potting mix. Containers will finish in 10-12 weeks when potted during the appropriate temperatures: Daytime 70-75° F; Night 65-70° F. Fertilize established (2-3 weeks) plants monthly with 1:2:1 ratio (12:24:12 or 5:10:5), fertilizing at 1/2 the package recommendation. NPK at 200 ppm weekly in injector fed systems.
More DetailsCanna can be planted anytime of the year in southern zones but the soil temperature should be 78-80° F. In zones 3-8, plant in spring and summer when ground temperature is not below 65°F. They should be started indoors one month prior to moving outside. Canna prefer a sunny location in moist, fertile soil. When planting outside, prepare soil by spading and adding compost or rotted manure. Rhizomes should be planted 1 - 1/2" deep and spaced 18-24" apart. Soak well after planting. For container planting, pot one rhizome per gallon in well drained potting mix. Containers will finish in 10-12 weeks when potted during the appropriate temperatures: Daytime 70-75° F; Night 65-70° F. Fertilize established (2-3 weeks) plants monthly with 1:2:1 ratio (12:24:12 or 5:10:5), fertilizing at 1/2 the package recommendation. NPK at 200 ppm weekly in injector fed systems.
More DetailsCanna can be planted anytime of the year in southern zones but the soil temperature should be 78-80° F. In zones 3-8, plant in spring and summer when ground temperature is not below 65°F. They should be started indoors one month prior to moving outside. Canna prefer a sunny location in moist, fertile soil. When planting outside, prepare soil by spading and adding compost or rotted manure. Rhizomes should be planted 1 - 1/2" deep and spaced 18-24" apart. Soak well after planting. For container planting, pot one rhizome per gallon in well drained potting mix. Containers will finish in 10-12 weeks when potted during the appropriate temperatures: Daytime 70-75° F; Night 65-70° F. Fertilize established (2-3 weeks) plants monthly with 1:2:1 ratio (12:24:12 or 5:10:5), fertilizing at 1/2 the package recommendation. NPK at 200 ppm weekly in injector fed systems.
More DetailsLocation
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsLocation
Clematis and vines will require an area that will have at least a half day or more direct sunlight. The plant depending on the variety will grow upright six to twelve feet. Although it can only grow as tall as the trellis, arbor or support that you have given it. For example, if your trellis is eight feet tall and the vine you choose grows to twelve feet, it would simply hang over and grow down the other side.
Soil Preparation
Clematis and vines need a moist, well-drained soil. Prepare your hole at least one foot deep and mix 50% peat moss or well-rotted manure. Backfill hole with the amended soil and plant the vines so the top of the root ball is just below the ground level burying the first set of eyes. The plant should be mulched and kept moist, not wet, especially during the first growing season. Fertilize every four weeks during the growing season with a
well-balanced liquid fertilizer.
Support
The main stem of the clematis or vines must have a firm support, otherwise damage may occur through wind. As the newly planted
vine produces new growth this should be carefully trained and tied into position.
More DetailsSoil Preparation and Planting
Best grown in fertile, humusy, organically rich, medium to wet soils in part shade or filtered sun. In general, green types can take higher light levels; dark-leaved ones need shade. Once nighttime temperatures are consistently 50-60° F, plant each bulb 6-8" deep and 2-4 feet apart. Water generously.
Fertilization
Fertilize Colocasia every three weeks during fall and winter. Use a liquid plant food with a balanced N-P-K ratio such as 10-10-10 or 20-20-20, diluted to half the strength recommended on the label. Water the fertilizer deeply into the soil immediately after application.
Water
Elephant ears are high water plants. Water as needed to keep the soil consistently moist, and don't allow the soil to become dry. Colocasia likes wet soil and is even appropriate for planting next to a pond, or in water up to 6 inches deep. Check the soil often if the bulbs are planted in sunlight.
Fall Care and Storage
Dig Colocasia bulbs after the first frost in autumn if you live in a climate with cold winters. Cut the foliage down to 2 to 4 inches before cutting. Allow the bulbs to dry for a day, and then place the bulbs in a box of wood shavings or peat moss. Store the box where the temperatures don't drop below 45°F.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More DetailsHow To Plant
Geraniums prefer full sun and a well-drained, moderately rich soil. They can handle partial shade, but become more prone to mildew if kept damp. Geraniums are not particular about soil pH, but a neutral to slightly acid soil is ideal. (5.8 - 7.0)
Mid Season Care
Shearing plants back to basal growth after blooming will improve their look and encourage reblooming. The plants fill back in within weeks.
More Details